New England Mod & Meetup Thread:

Swing by, I still gotta show you what the kdmax tune feels like

 

Now that we have a date, I'm ordering parts.

If we're taking the fronts apart far enough to replace the dust shields, are there any seals or o-rings we'll be touching that I might as well replace? I'm just ever so positive they're gonna be fucked up if I don't have replacements in hand.

 

Our trucks are going to look like slightly different versions of the same thing haha

 

are you talking front brake lines?

 

Thanks good sir! I have a driveway but no garage that'll fit the tacoma. But Mr. Floats is coming by to grab a rooftop tent. I don't see much wrenching happening on the 8th, just breaking out a dislocated welded nut on the crossmember that's holding my skid plate on. Not even putting it back up, since afterwards I'll be doing a bunch of stuff under the skid anyway.

 

Yeah, there's that section of hardline on each side on the fronts, unless I remember incorrectly.

Edit - found 'em, 4731804110 for the left and 4731704050 for the right

 

I'm just going off the parts catalog online but these looks like the little metal lines that connect directly to the calipers.

4731804110 - RH
4731704050 - LH

I could be wrong but says they're for 05-11

 

I could make it. Not sure if I’ll be working on my truck or helping someone out.

 

@AllTacosFloat you running a ubolt flip kit? if not do you want some free u bolts/nuts? I've got the ones that came with m RXTs but I've got a flip kit so they're useless..

if not you, anyone can have them for free.

 

Thanks but yes, I have the superbumps. Same tho...I have a set of the u bolts from the rxt of anyone needs.

 

.... I want to come....

 

@Blancoburrito you want to come do your fluids?

 

We going to caravan again?

 

OK, I'll add you in the pm when it goes out.


Yes, the caravan is always fun!

 

I'll be bringing a non-TW friend if that's cool. She needs LCAs put in - I have parts, including all new cam bolts. Anyone feel like throwing a couple beads of weld on her cam tabs while they're off?

 

We will not be doing any welding unfortunately, but we have torn out LCA's in the past with Seized cam bolts......If the cam bolts are seized, please make sure that you bring at least 4 of these with you (and I am being very specific because they are the only ones that actually do the job).
https://www.homedepot.com/p/Milwauk...ocating-Saw-Blade-1-Pack-48-00-5201/302432539

Make sure they are the 6 inch ones, not longer than that, and they are the "torch" Heavy metal Carbide. I have a couple of professional grade Sawzall's. Ask @HAVOC about when we did his.

 

@AwesomeLaw68 and @MikefromCT

 

Not sure if welding will be there... usually that's in Lawrence.

 

I can vouch for those blades as well... they cut right thru the frame no problem.. @Brownmatthall