1st Gen Lunchtable Thread - General Discussion

I'll have to grab a pic of what 0 psi looks like. The creepies sidewall is beefy enough that they look low but not flat

 

Thought you needed a bracket made some 4-6 years ago

 

oh I have my cardboard aided design all done up, I just need to blueprint it for you. I havent' made it to the shop since last weekend

 

@01x4 and @0xDEADBEEF I would like to drive one just once for the experience.

 

Just don't make it any harder than it should be for yourself!

Last one-off item I cut was from a pic I got via text of said part drawn on scratch paper.

 

This is what it looks like at 8psi

 

perfect

I figured I could ballpark it since I'll have to make some tweaks anyways since the mounting spot isnt ideal

 

It’s more like a go kart and less like a car.


And my eyes line up with the top of the windshield

 

They’re 17” rims off an FJ Cruiser

 

I want bigger tires

 

The skinny 33s still apparently lighter to than the 275/70/17 K02s, but only slightly.

 

Except, I'll make sure the tires are meant for the same diameter wheel I already own.

And if I find a used set with wheels, I'll make sure they're the same lug pattern.

Who knows, might find a set of 35s from a Nissan Rogue or something

 

@Kwikvette I also have the 5100s up front which I think gives me 3” if lift. I’d actually like to bring it down to 2” if I could to make the cv angles a little better.

 

Come buy one of my trucks

 

The 255/75/17s at3 4s I have are 39 lbs each.

 

I wouldn't be so wrapped up about minor weight differences; you've got a Tacoma not a race car.

 

Actually I have a set of old mom Michelin 34s you could have

 

Who knows, I might enter it in a 24 hours of lemons race since I technically didn’t pay anything for it

 

Drive it on down then; always a spare bedroom here to recuperate from the back breaking drive in a hooptie