Trd 4 runner wheels on Tacoma

Hello, I am looking to get some matte black 17x7 trd wheels on my Tacoma but am nervous they aren’t wide enough since my stock wheels are 17x7.5 and do not sit flush to the fender as it is. Anyone have these and know what they will look with 275/70/17

 

Assuming you meant the SEMA Pro wheels.

https://www.tacomaworld.com/threads/17-trd-pro-sema-wheels.366951/

 

I run 275/70/17's on SEMA wheels.

 

Here's the poke with a 285 tire on the Pro 4runner wheels.




You might be flush with a 275 tire on this wheel.

 

@Koolbreeze7 do they sit perfecly flush with the fender?

 

Stock 16” SR wheels vs 265/70R17 on stock 17x7 (non-Pro) 4Runner wheels.

 

yes pretty much flush.

 

@CB350G do you have a photo from the side please

 

I made the switch from 265s to 285s and it was the best decision I made. I recalibrated the speedometer along with the kdmax pro 9 tune and getting 18 plus mpgs, no rubbing, stock mud guards, no cmc. Hope this helps.

 

@VaToy is this a 285/70/17 and how many inches of lift do you have

 

Yes, 285/70/17 little over 2 inches up front and 1 inch in the back.