What Have You Done To Your 3rd Gen Today?

Just installed 17x8.5" with 0 offset FSW (Factory Style Wheels) 2022 TAC PRO Style and 265/70/17 Falken Wildpeak AT3. She's a little dirty, needs a bath. My setup has 2" Rough Country N3 front struts and 1" blocks in rear.

 

Just curious. All yous guys deleting rear seats, what do you do with the seats when removed? Peace and Love

 

Today I mounted my HiLift Jack using the RCI brackets.
Then I grabbed a painting canvas from home depot, rattle canned it, and used one wrap to secure it.

Keeps it discrete, and the canvas keeps it relatively dry.
As a bonus canvas can serve as a tarp during repairs, fire retardant , or weight on a tow strap during recovery.

 

What did I do today was actually pick my Tacoma up!! TRD 17” Wheels, Ko2 tires, TRD OEM lift, OEM bed mat, OEM side rail/step, 3M front fascia area . Soon to be installed blackout lettering, and of course Amazon TRD tire valve caps .

 

Finished up the driverside hydrobump, got everything loctited and finished fender trimming. Just waiting on shafts from a buddy, and then its time to beat on it!

 

Washed it from all the pollen it needed it

 

That looks sick

 

Dont get metel valve stem caps they coroid and u will have to use plyers or wrench to get off. Speaking from experience.

 

Got 3 and 2 lift kit installed and new 265 70 17 durtrac tires

 

I remember years in GA where it looked like it rained yellow snow from the sky. I dig that striking cobalt blue color.

 

Sheeeesh

 

Congrats. Looks great.
Just something to consider. Metal tire valve caps can corrode and get stuck to the stem/valve. When you try to get it off sometimes the valve pulls out too. Happens with cold snowy Canadian winters.

 

I am taking your advice as one other mentioned the same thing. Thanks !

 

Note to self: if you think you have enough 3/8 extensions to change a spark plug, you don't.

Oh well, it'll be a nice day for walking to the hardware store. Again.

 

Nothing too fancy today just a couple more chrome delete items.

 

Where did you tap into to get power

 

Now we're in business. Suck it, buried ass plugs.

 

I busted the bumper cap when I backed into a pillar. I flustered from some woman pulling right up to my bumper despite me having signaled and angled my truck as to obviously be backing in—I got in a hurry and made a fool of myself :smh:
With the glare on my screen plus the shadow, I didn’t realize the pillar had a “+” cross section and thought it was square, so I thought I had another 8” or so..

I’ve ordered replacement bumper caps. I’m using this opportunity to do a chrome delete, so I also got matte black badge overlays and a wheel blackout kit.

I did hit that pillar with some pretty good force (~2-3 mph), is there anything I need to be concerned about or inspect on my truck other than cosmetics?

 

There is a "crumple zone" part inside/behind that might be also be cracked. I nudged a tree way back and I just ended up replacing it with a Rear steel bumper. That's when I discovered it.
Other than that, not noticeable at all. But, do check the painted metal part where it attached to. Make sure no chipped paint.
Sorry to hear this.

 

We don’t do ppf. We take all our ppf stuff to pristine ppf in lake elsinore