Flapping rubber trim near tire well

Any idea on how to find this trim and reattach? I have one missing and the rest are lose.

 

Should be these:
(Can also find on McGeorge etc)

Rear
https://www.toyotapartsdeal.com/oem/toyota~pad~reae~wheel~opening~extension~no~2~61783-35090.html
https://www.toyotapartsdeal.com/oem...l~opening~extension~pad~no~1~61783-35070.html

Front
https://www.toyotapartsdeal.com/oem/toyota~pad~front~wheel~opening~extension~lh~53851-35060.html
https://www.toyotapartsdeal.com/oem/toyota~pad~front~wheel~opening~extension~lh~53851-35060.html

You're going to want some clips for your flares because they break when you pull em:

Blues
https://www.toyotapartsdeal.com/oem/toyota~clip~outside~moulding~no~1~90904-67036.html
Reds
https://www.toyotapartsdeal.com/oem/toyota~clip~outside~moulding~no~1~90904-67037.html


Can't remember off the top of my head how many of each color per flare but a full set should be 18 red 8 blue.


Set on Amazon:

$6 XQSM 26 PCS Fender Flare Retainer Clips Compatible with Toyota Tacoma 2001-2004 Fender Flare Retainer Clip Replace 90904-67036 90904-67037

https://www.amazon.com/XQSM-Compati...retainer+clip+,aps,141&sr=8-3#customerReviews

 

Thank you. I am going to have to give those a shot. So you just take off the flares and reclip them in with those as a gasket. No adhesive?

 

The seals should come with a tape strip that you’ll have to peel off prior to install that’ll act as an adhesive to the fenders.

 

Also a good time to paint the flares if you're going to have them all off. (Assuming you want to. Just saves having to pull them all over again)

 

X2 on this. ^
I raptor lined mine. One of my favorite mods I’ve done.

 

Sounds like a good plan to me. I need to get some body work on the drivers side since it was hit a couple times.