What Have You Done To Your 3rd Gen Today?

Tufskinz has all sorts of interior trim pieces in OE colors. I added the door inserts in TRD Red. You can get a piece for the center console.

 

I added some black trim pieces:

• Black dog seat protector (perfect fit)
• Black dog (this one isn't new)
• Matte black steering wheel emblem overlay (these are getting hard to find)
• Black vent ring overlays

 

Once you educate yourself it's really easy . Here a link to some great material. Read Every bit you can. I did to make sense of all this . https://4xshaft.com/pages/articles

I know didn't have enough air in my tires for my front end . My front of my truck is around 3100lbs and 35 psi wasn't enough. I started getting feathering of my treads , meaning the one tread block was more worn than the next . Causing abnormal tire vibrations. I'm running about 41psi in the front now and about 36psi in the rear tires . I bought a Klein angle finder from home Depot to find the degrees on the transfer case flange and the rear differential flange. The additional air pressure helped me out. I didn't have too much chatter at low speeds, it was more at hwy speeds. Higher over stock? Lift? I have a modified 6" lift. With my heavy front winch bumper and 12k winch , my lift did really lift the truck to much, which resulted with a bunch of down travel. For example if I jack up the front of my truck you can stack almost 3 adult heads at full droop in the front fender well. Many people say drop bracket lifts don't give you down travel at all , well technically they are wrong when you put all that extra weight in the front like I did lol. My rear leaf springs I made my own modded rear leaf pack . I did a 2.5" aal and a 1.5" aal with my stock springs . Is it rough riding? No not to me not at all. So I'm around 5ish inches in the front and 4 inches of lift in the rear . I like the way my suspension ended up . My truck rides to my likings so that's all that matters that I am happy. Can't guarantee the next guy will like it. I did recently at RAS suspension systems to my rear leaf pack . It's like a two for deal. Does what air bags do and also what traction bars would do .

 

Put me in line for the pros if you decide to ship!

 

Have the Stage 8 Icon kit. What option did you do with the rear leafs?

 

Damn brother that sucks… and I feel like an asshole that I had just made a thread asking about straightening my bed that’s off about a half inch , Seriously though hope everyone’s ok, stuff can get fixed.

 

There is a Canadian manufacturer of tail gate covers as well.
Gar-Fab.ca

 

This guy is halfway decent --

https://youtu.be/tVMI3LAZKcc

 

Ha ha, mines in the hood. Debating putting them on the shocks.

 

Had a little fun this weekend with these from @FreshMexicanTaco they look sick at night.
Real overlanders used their ditch lights once every 6 months.

 

I love that. I wonder if these meets requirements if you are in an A-hole state that requires everything but the headlights to be covered when on the road?

 

Hope everyone is ok, and now think of new lights and anything else you can get done while being fixed.

 

Reuse your internal core? Please explain.

 

busy weekend!

 

How do you like that bed cover? Wife thinks we should get one and was looking at this one last night? Its the tyger auto right? Very good reviews

 

I wish my dude would make them for the DD's. I'd buy 20. Those are so slick.

 

Where did you pick up some LED headlights?

 

Not today but from when I registered my 21 a couple years ago. Only mods are my cap, green vinyl over my lower lights, and my vanity plate. Here it sits beside my 03 winter truck. The white cap in back is for the 03.