Power rear window for access cab

Perhaps the 2023 Access Cab has the the harness already in place with the motor connector waiting to be used.

 

So a Silversurfer posts $800.00 and you take it as lore...yeesh. Why do I bother.

 

So, fused power of power window (OEM) to juice added 5 pin relay pair.
A Single Pole Double Throw momentary (ON)-(ON) switch or an OEM one.
And a probable motor connector (B15) already there at the rear wall of the cab...

 

that's real interesting - but most probably way beyond my knowledge of electrics unfortunately

I wonder if the dealership has ever done it? Probably overpriced but might be worth a query.

 

The Stealership would kill ya in man-hour fees...

 

that's the truth

 

$5.00 dual 5 pin relay base...

 

The fused source at IL3 that's behind the passenger side kick panel.

 

Terminal (pins) info on the IL3 connector:

 

Does this complicate/confuse:

 

ha yes -- I wouldn't know where to even start

 

OP, would you do me a flavor, if you know and dare to remove the door "sill" and the kick panel on the passenger side. Post a pic of the IL3 of your Access cab.
TIA.

 

I have removed that before so I'll take a look and post a photo

 

Regular cab with power slider would be a total baller mod lol.

 

The regulator thing is a pita to get back on.

 

Lazy man's mod haha, I'd rather put the money into my stereo if I was gonna

 

@caribe makaira Old thread revive, but I was curious what wiring existed in my 23 Access Cab.

The plug for the switch is behind the dash already:



The relay holders are there (with no relays) - this is the one above and behind the glovebox:



The wiring that appears to be missing is the green/grey wires from the back of the IL3 harness - this is what mine looks like:



So if I read through everything that you have posted on this in the various threads correctly, I can buy two relays and plug them into the holders and add the two wires to the IL3 connector and then run that back to the scrapyard OEM motor/regulator I bought for $70, and that would get me my power and switching for the window right?

 

Seems correct...