FEND-X Tacoma Wheel Liners

Hey guys.

Decided to go a different route and have a set of these custom fender liners from Fend-X for sale. Brand new. Was meant for a 3rd gen with trimmed fenders.

Message me if you’re interested.

sorry if I posted in the wrong section.

 

Appreciate the shoutout Brian! You did a great job installing your FEND-X Liners. The kickers turned out great with those Trimmed Fenders and Bushwacker Flares. Enjoy the custom gear

 

3rd Gen Trimmed Fenders + FEND-X Tacoma Wheel Liners = A drop in Fit. Protect your Fenders | Air Intake | Door Jams | provides waaaay more clearance than a traditional Liner.

 

I have a few questions in regards to the trimming+fendx sending a PM now

 

PM replied

 

Trimmed Fender game is strong with this one

 

My fenders are not trimmed but I have a high clearance tube bumper. Do these cove the area under the headlights to prevent mud and debris from getting up into that area? I managed to cut and massage with a heat gun to get my stock liners to cover it and tuck up pretty tight but would love a really clean looking solution.

 

Hey Mike, yes the FEND-X Liners can be designed with a wing that folds up and tucks into the backside of a Tube Bumper like I do for the Plate Bumpers. Here’s a couple examples of coverage / how tight these can tuck in that area.






Before & after

 

Thanks for the quick reply. I'm seriously going to consider getting a set of these.

 

Happy to help, look forward to getting you geared up!

 

FEND-X Liners batting clean-up on the stock front bumper | provides much needed clearance

 

Day ‘n’ Nite

Fiberglass
VS.
Trimmed fender

 

Any discounts available at this time?

 

Happy trails TW. If you pack it in, Pack it out!

 

Design is one of the few disciplines that is a science as well as an art.

Good design is often times harder to notice, because it fits our needs so well the design is nearly invisible.

 

FEND-X Liners with Trimmed Fenders, check out the shop site https://geartechcustoms.com/ for complete Tacoma Fender Liner solutions.

 

It’s often asked, does the FEND-X Trimmed Fender Liners come wider than the flares?

This specific configuration is designed with a ‘kicker’ (lip) integrated into the Fender edge of the FEND-X Liner. Aside from adding style to the Trimmed Fender, the main purpose of the kicker is to cover the gap between the Flare and Fender that is incurred from when you trim the Flares.

With that said, the kickers can easily be dialed in flush to the Flare or we can design wider kickers for use with Trimmed Bushwhacker Flares. When ordering for *TRIMMED Fenders*: please, specify in the order details what style Flare you are running.

 

What is your lead time on new orders?

 

Lead time for FEND-X Liners is 5-6 weeks. Varies on the configuration, trimmed fender Liners are currently 4 weeks.

 

Custom LOGO’s available for FEND-X Liners and TRAILTEC Engine Guards. Engraved or Colored Backplates #UNIT-91 thank you for your service