What Have You Done To Your 3rd Gen Today?

faded

 

Toyota is running buy 3 get one for $1. Get the parts guy to quote you at cost then go to discount tire and they will meet or beat a written quote.

 

Did you need to deflate the fifth wheel to fit underneath?

 

No. The 285 fits fine underneath with the horns beat down a little bit and the hoist relocation mod. Actually needed to check it's psi since it's been a while and set it to 37.

 

Going mother effing camping for 4days time for a reset .

 

If you post here, the moderators will ban you for life!

 

Cleaned and painted the gashes and scrapes in my sliders from my outing last week.

I got them powder-coated when new but the flat black spray paint/primer matches pretty well. This isn't the first time I've had to do this.




I filed the rough spots down, used some emery paper to smooth them out a little more then cleaned the damaged areas with de-natured alcohol and then applied two coats of the spray paint.

Lucky its in the mid-80's here today in Phoenix so the paint dried pretty quickly between coats. Also don't really have to worry about agressive rust since it is so dry here and we don't have winter salt on the roads here in the desert.

 

Update: Heavy 32lbs method wheels sent back. Ordered 5 very rare limited edition 17x9 wheels with -38 offset. Something very, very limited edition. Pics when they arrive. Should hopefully clear customs in week and ship shortly after. These are going to be wild with MGM.

 

What hood decal did you put on……thanks

 

It's this one

 

Is that a Pink decal ?

 

I really like the bronze/gold bumper matching the wheels. Great job!

 

Are they teal by chance, jealous.

 

GO BILLS!!!!

And to be relevant, I installed a Body Armor RTT yesterday...LOVE this! We wheel/camp a lot and this eliminates ground camping for us!

 

Waiting.

 

Those mats looks a lot easier to clean compared to the OEM mats. Nice!

 

I just placed the order yesterday and within a few minutes the order has already shipped via FedEx. Hopefully early part of next week, I am looking forward to the install. (MillerCatShield)

 

I keep a full sized spare at 285/70/17 in the stock location. Aired down to about 20 PSI to get it to fit the best after banging out the tabs a bit with a hammer.

 

I only have a couple things left on my chrome delete. Push start ring (I have black one from AJT Designs) and the side mirror adjust switch. Any suggestions on it??