What Have You Done To Your 2nd Gen Tacoma Today?

Thanks. I just cut off that busted part and slide it back on.

 

Similar here. I did add a short extension using a union to give some slack.

 

Just hit 87k!!!

 

Finally got that stripped front diff drain plug loose!! changed the diff fluid and put a new plug in.. Not sure how to get that bit out of the old plug..

 

Installed a prodigy brake controller. Getting ready to pick up this:

 

From an old hack, clamp the Allen bit tightly in a vice, with a little room for two flat head screwdrivers to either pry and lift the plug off, or tap the drivers with a hammer to pop it off. Been there, done that.

 

L O fucking L

 

Added some Ark splash gaurds. Definitely a nice upgrade over the oem flaps.

 

got myself a hooke road tailgate panel. was going to make my own but these are $120 shipped on ebay now from various sellers. it's surprisingly heavy/thick but shipped locally from some random warehouse an hour east of here so somebody must be flooding the market with these things. looks like it's CNC routed from rectangular hdpe. it doesn't have the taper so you can see some white on the sides in this pic.

 

oh yeah, almost forgot...

 

Had truck re-geared a few weeks back, and ended up with a bad front differential leak after.
Took off pans this morning, and found this fine craftsmanship.

 

Yeaterday I took my sway bar off, helped move over a ton of concrete. Went wheeling at Kimbell Creek. Then paddle boarding today. I'm happy with the sway bar removal.

 

Sic mini toy hauler. Details?

 

It’s an InTech Flyer Explore. All aluminum frame and skeleton, with aluminum siding. Off-road package provides good ground clearance. 2023 mid year model. Weighs in at just under 2000 pounds. Tongue weight with kitchen is a little high at 200-400 lbs. Should be okay if loaded correctly. Interior has 8x5’ of loadable space for quad or bikes. For me it will be used to transport my FishCat 9 pontoon fishing platform with gear. It sits just under 6’ tall inside. I’m 5’10” and have to tip my head a bit but I don’t plan on standing up the whole time so I’m okay with it. Pull out kitchen with 2 burner propane and Dometic fridge/freezer. 8 gal fresh water, 11k air conditioner, and propane heater. 270 degree Rhino rack awning. 1 tip out full size bed. No toilet or gray water, but I’ve got that cover with a 2 room toilet/shower tent and have a Coleman H2Oasis that work great for instant hot water.

 

Finally got a project done Ive been after for a year. Dropped the steps off and sprayed bedliner along the rocker panels and on the fender flares.

 

looks good !!!


Just ordered the same rear bumper ...
How was the installation and is the paint finish ok

Thanks

 

It's been raining every weekend so it's hard to get anything done.

I did get a new clip for the OEM temp sensor on the radiator support so I guess I can change that if it stops raining for a few minutes.
The bus bars that I ordered on Amazon came in. I need to mark and drill the holes and finish wiring the fuse/relay box.

 

New clip installed.

 

Awesome. Any rubbing ? Offset ? Any trimming required ?
(it is a slow morning)

 

hit 69k miles yesterday