What Have You Done To Your 3rd Gen Today?

Thanks @STrooper for the black exhaust tip. Now no one can see my sawzall hack job

 

https://instagram.com/p/CqHePQyA1k4/

 

I don’t know where else to ask this. This might be a dumb question but idk where else to ask. Mind you this is my first truck I own. When I’m in park and I turn the ac on just regular 69 degrees the truck will shake a bit every 30 seconds with the RPMs just going from 0 to 1 slowly. Is this normal ???

 

Yep. It’s just your AC working. This is a safe place, tree of trust lol

 

Appreciate you fr thank u

 

Almost finished building my trailer today. Its 86 x 40 inches. Just need to get some carpet for the bunks and its all set for the boat. I do eventually want to make a cargo deck for it so I can haul ice fishing gear.

 

oldie but a goodie

 

Welcome to TW. Look at the posts and you will get many ideas for all your future mods!

 

Looks great to me!!!

 

Sealed up the tailgate using TruXseal. Still need to get shell lid dust tight as the rubber flap doesn’t even touch the top of the tailgate.

 

You’re right I added a black overlay for the steering wheel and these black covers for the hvac and 4wd switch. I really only needed one to black out the 4wd switch but decided to get them all since it makes the knobs easier to feel for when your eyes are on the road. Really nice product and they just slide on takes 30 seconds to install.



https://bonoboproducts.com/products...18-2019-2020-2021-2022?variant=41596806332577

 

Checked the bolts on my skid plates to ensure they do not drop onto the road. Lefty-tighty/righty-loosey ...

 

This is true if you’re looking at the 6 o’clock position.

 

these are the ones I got, I got them from Americas tire

 

My buddy came over and we installed my Trd pro shocks, westcott design lift, and wheels and tires. Just needs an alignment and it will be 100%.

 

Those the Black/Bronze method wheels? Looks sick

 

Cleaned up my sliders and put some rustoleum rust converter and pretty happy with the results

 

Installed the J&L Catch Can today. Need to rework the line coming off the valve cover. It works, but it’s too long and looks shitty.

 

I love how you ran your wires for the phone mounts.
Currently I have my USB cable held down with some hot glue with it running along the outside edge of the radio bezel. Kinda ugly and I'd love to have it looking clean like yours.

Any chance do you have pics of how you did it?

 

What does an oil catch can do for ya.?