Volk racing TE 37 on my tacoma

17x8.5 -10 with Toyo 285/70-17 AT3’s, zero rub

 

Have you taken it offroad?

 

Just got them on yesterday but on the way home went down a dirt alleyway that’s washboard city goin’ about 20 mph got no rubs.
Plus, while the fox pro shocks were out we precycled the wheel/tire up n down to make sure and there was only one spot so we heated it up and pushed the plastic back 1/4”. There’s a cnc next weekend followed by a run at a nearby ohv park so wanted to make sure I was going to have zero issues.

 

Def not the norm. I’ll be curious on how the ohv works out for you.

CMC and pinch weld too?

 

Nope. Yeah. We’ll see. Plus with the toyo AT3’s I went with 355550 at 32.8” vs 355540 at 33.0” which is where I got lucky with them being .2” smaller in dia. or I think I would have had more rubbing issues. Also a lot in here went -20 offset which pushes the wheel out that extra 10 mm gives more rubbing issues vs 0 or -10. But I def couldn’t go 0 as my tire sidewall would probably hit the uca. At -10 it’s 12 mm from the uca as it sits.

 

Well…the -20 is 8” wide while the -10 is 8.5”. In this case the -20 only sticks out 4mm further than the -10 so negligible at best.

 

very nice. Sorry if you already mentioned, stock Pro suspension?

 

Yes. And Westcott Designs frt/rr lift.

 

beauty. Would love more pics

 

Thank you!

 

Does anyone else with 265/75s feel like they are super narrow?

my SCS wheels 17x8.5 with 265/70s are much wider that the Volks 16x8 with 265/75s. I was trying to keep the weight down and not cut a lot but I think 285s may be the only way to get the look in after.

 

Do 255/85s

 

16x8+0 285/75/16

 

Which center caps are those?

These are the best I could do:

 

https://www.ebay.com/itm/334255213623 I wish I could fit the rear Stoptech with my wheels

 

Thank god, I was about to return my 285's that are getting mounted on mine this week, but I think I can get what I need with my setup as its the same as a PRO (2'' / 1'') with some caster manipulation. Thanks and looks good!

 

Damn, so 3'' lift, now I'm thinking I need to go with smaller tires.

 

The 23’ pro is 1.5/.5. The Westcott Desgns kit added 1.5/1 ~ 3/1.5. I actually have a little rub now that started this week at the frt right mud flap install point but should be an easy trim. Maybe you can go 275/70-17?!?

 

JDM yO

 

Dets?