What Have You Done To Your 3rd Gen Today?

No problem, or you can google it and his website should pop up but he has thread here and offers tw members discounts.

 

perhaps a sawhorse with a plank?

 

Any ideas on how to remove the bolt head I snapped off when making an adjustment to the prinsu cross rails? Maybe put a googly eye there?

 

The OEM’s can’t be greased. I’d be worried more about the wear. These things were loose. You could move them about with no effort.

 

A small easy out and a drill bit after soaking with some penetrant fluid possibly. Or if there’s enough to take the bar out and grab with some vise clamp pliers.

 

Reverse drill bit? I've had pretty good luck using them.

 

These look great! What are you doing with you old tail lights?

 

how about disconnect it and stand it up on the end and pound the snots out of it that way , just lean it against a blanket and don't dent it.

 

That's what I've been talking about doing.

 

@drizzoh

I had my son-in-law help me when I partially removed the tailgate. He used impact tool and it would not budge.

The vendor gave me credit for it and I ended up shipping to a member here for free!

 

Got them from Tacos4cheap

 

Same here. Screw didn't want to budge, I didn't want to fight with it. I ended up going with the Sabelco instead as well.

 

I ended up using a hose clamp and some shrink tubing.

 

Other than you, no one will ever know. Looks good to me.

 

Fixed the rattle after my rear lift install.

So when I was getting under the truck to check the torque on every bolt I grabbed the spare tire to help slide myself under the truck and found my rattle.
I didn't tighten the spare all the way when I put it back.

Gotta love the easy fixes.

 

Wow, different.

 

First removed TRD Sport panel decal to put on a CDN flag decal. Then finally did the door emblem swap. From a Tacoma badge to Sequoia's TRD Sport badge. I like em.

 

Search for @christian06 He is the guy who makes them. Support a small business!!

 

Dude, it was a MFer. The first time I did it, I had to drill out the screw and use an easy out. After doing that, I realized I took out the wrong bolt. FML... @christian06 squared me away with another bolt and I tried using the impact gun like he recommends. No joy. Still had to drill it out. Whatever damn glue/locktite they are using at Toyota works really well. lol

 

It seems that you have been accepted into their tribe.