Redside Electric Plug-and-Play Switch Illumination Harnesses

So with the daisy chain I just wrap up the black wire from the rigid light and just use the built in ground from the daisy chain right? Sorry I know it’s pretty simple.

 

Yeah just cap it with electrical tape.

 

The left of steering wheel harnesses are sold out until further notice. ETA is about 4 weeks. Thanks!

 

On that note, do you have anything for the overhead console?

 

I’ve got a few of those, they just aren’t listed. Shoot me a PM and I’ll set one aside.

 

@kmorgan3 sent you a PM.

 

@kmorgan3 also sent you a PM!

 

@kmorgan3 sent you a PM about an overhead console harness.

 

All PMs should be replied to. Thanks!

 

Sent PM

 

PM sent

 

Hey folks - a reminder that I no longer supply harnesses to @CaliRaisedLed -- it appears they are having QC issues with the harnesses they have knocked off:


I have had people contact me regarding purchases they have made through @CaliRaisedLed asking for support and I will not provide help as it is not my product. I understand the confusion; they continue to use the same name, product description, and images of my harnesses. Our attorneys are currently discussing. If you purchased from one of my retailers or directly through me I am more than happy to help. In the meantime please beware.

-Kyle

 

Pm Sent.

 

@kmorgan3 what gauge wire does the left of steering wheel harness use? I'm looking for a door trigger for my SwitchPro and was recommended to tap the blue CCTY wire on the cargo switch harness. I'd rather posi-tap into your harness and leave the OEM harness untouched.

 

It’s a larger gauge than what the actual cargo light connector uses, so your limitation is what the truck-side harness uses. With that said, it should be fine to use it as a trigger for a switch pro as I think that’s just controlling a logic board. The circuit you’re referring to is ground-controlled, so make sure your switch pro can take a ground trigger.

 

Yeah I'm not going to pull amperage from it, just read the active high/active low signal. So a 20-22 positap or 12-18 positap for the redside harness wire?

 

Where would one order a 400w anytime harness? I couldn’t find a link for that.

 

They are currently on backorder:
https://guildoutfitters.com/products/400w-in-motion-harness-by-redside-electric

I would say give it a couple of weeks and they should be restocked.

 

Appreciate that. I did see them out of stock and wasn’t sure if you had a direct link.

I ordered one from Cali raised today and then I saw your post about them not actually being your harness. Hoping they will cancel without much fuss.

 

I have a spare, though it's ktjo brand. Got it for a friend but that friend sold for a Tundra. Yours for shipping if you want, I'm sure I paid some $ for it but I already have one so I don't need two.