What Have You Done To Your 3rd Gen Today?

Looks awesome!

By any chance, would you be interested in selling your TRD Pro tail lights?

 

You put these on your mirrors and can angle them front to side.

 

Thanks for that ... I think ...

 

No, I think that might have worked tho.

I have an upgraded fob and don't typically have the key. I thought I was hearing the actuator work, tho. So, at the time, I didn't think a key would help.

After opening the inside, I see the lock was just stuck in the middle. The actuator couldnt push or pull the lock the entire way.

I'll probably have to start keeping the key handy in case it happens again.

 

They work pretty good for me and I didn't want ditch lights on my hood. Plus, almost nobody even sees them.

 

what if the battery is dead and car is locked? you would be in trouble

 

Can you give any more information on this, I’m looking for something similar. Thanks

 

You're right, I noticed the difference with the jack removed and weight of truck fully on ground. Appreciate that. I still got the
303 Marine Aerospace Protectant – UV Protection for extra protection.

 

Something related happened to me.

My actuator stopped working I was like huh? Took it apart and noticed that the actuator had jumped the post so it was still working but it wasn't throwing the lock from locked to unlocked. So I put the actuator back on the post, reassembled and it's been working ever since as expected. In retrospect I realized that I had locked the tailgate while the tailgate was open and then slammed the tailgate shut which caused the post to jump from the grip of the actuator. Just FYI for you all.

 

That came out awesome

 

I think I'm going to add some front door speakers too.

 

I run mine on the roof rack, no issues even when it’s 1/2-3/4 full and sloshing

 

I used Anderson Quick Disconnects. Winch has pigtail to reach.
I also added a circuit breaker inside the cowling to prevent some a-hole from shorting out my battery via the QDs.
I have a 15' extension cable to reach from the front QDs to the rear when the winch is there.

Clip allows easy access to the cable:


Isn't annoyingly obvious:



I like your receiver location much better than where mine is. Higher is always better!

 

I'm happy to have mine there!

 

Orbis Stakpak Plastic Long Stacking Container, 48 x 15 x 10-3/4, Blue

Orbis Stakpak Plastic Long Stacking Container, 48 x 15 x 10-3/4, Blue

https://www.amazon.com/dp/B07DC89QKV

 

Nice job. Only seen a few people with these.

 

Thanks. To you too!

I used Ignite "Spot". I think I'd rather have used "Flood". But they work.
What did you go with?

 

All the sets I built have the flood ignites. Really good coverage.

 

Just a suggestion, while you have the door panels off, spend some time and sound deaden the doors and panels. This will improve bass response immensely.

 

Thank you! I told my wife "I think I am more proud of this than when I completed my master's degree"