My engine swapped 3rd Gen build thread

lm546 · May 25, 2023

A 1st Gen. With a Tesla motor? You gotta post a link to the build here. That’s awesome.

Drewthecarguy · May 25, 2023

lm546 said: ↑

A 1st Gen. With a Tesla motor? You gotta post a link to the build here. That’s awesome.
Click to expand...

I will for sure

Just_A_Guy · May 25, 2023

Drewthecarguy[OP] said: ↑

I’m picking up a 1st gen Tacoma that I’m going to put a Tesla motor in
Click to expand...

Naveronski · May 25, 2023

Drewthecarguy[OP] said: ↑

I have the truck up for sale if anyone is interested, I don’t have enough posts to post it here on so it’s just on marketplace

got to make room for my next project
Click to expand...

Drewthecarguy · May 26, 2023

Naveronski said: ↑

Click to expand...

Hahaha funny thing is I still can’t make a for sale thread it keeps saying enter a valid title, must be confused why there is a LS3 in a Tacoma

Naveronski · May 26, 2023

Drewthecarguy[OP] said: ↑

Hahaha funny thing is I still can’t make a for sale thread it keeps saying enter a valid title, must be confused why there is a LS3 in a Tacoma
Click to expand...

Idk.

And for some reason, they reset your post count too.

Squatting Pigeon · May 26, 2023

Drewthecarguy[OP] said: ↑

Hahaha funny thing is I still can’t make a for sale thread it keeps saying enter a valid title, must be confused why there is a LS3 in a Tacoma
Click to expand...

Are you using a VPN?
The site doesn’t like those things.

Squatting Pigeon · May 26, 2023

@Drewthecarguy create your for sale thread in the “Chat With the Staff” section (very bottom of forum list) and we’ll move it over to the marketplace.

Squatting Pigeon · May 26, 2023

Also I’ve now had time to read through this build, and have to give you mad props. That thing is awesome!

johnw · Jun 3, 2023

Drewthecarguy[OP] said: ↑

I’ve pretty much got the motor mounts fabricated up, I’m curious is anyone would be interested in some, I could mass produce them pretty easily. I have also made them so you use the factory Toyota rubber mounts so there is no cutting and welding on the truck. I’ll get some pictures up when they are all done
Click to expand...

I will buy some right now 2nd and 3rd gen mounts are the same I'm throwing a 5.3 in my 2nd right now

NastyBogging · Jun 15, 2023

How's your fuel economy after the swap compared to prior?

GC23 · Jun 15, 2023

Just read thru this thread - wow! Very cool and dang nice work. Looking forward to future projects. Thanks for posting!

BlondeBTCH · Jun 29, 2023

Squatting Pigeon said: ↑

Are you using a VPN?
The site doesn’t like those things.
Click to expand...

Sorry but why not use a VPN? After you just about to get your retirement account cleaned out you will start using a VPN too. Even though we have to pay a monthly fee. We were lucky and caught on before it was cleaned out. Our CU went to the account that was cleaning out our account and electronically got our retirement back then locked down all our accounts. We even had to go to the police station and fill out statements. Some how they got our checking information and were pulling all they thought they could without being caught.
Also I signed up to ask someone who was selling something a question and I got a message saying something about you don’t have privileges to post here or something to that effect. I was just going to ask a question for my husband. He hates the internet.

Thanks

hayrider2.0 · Jun 30, 2023

Amrc · Sep 9, 2023

Drew,
Great job on the build. We are building a 54 Chevy with the same motor. Any way you could answer a few questions for us? 314-614-4944.

Thank you,
Andy

CygnusX191 · Sep 9, 2023

Amrc said: ↑

Drew,
Great job on the build. We are building a 54 Chevy with the same motor. Any way you could answer a few questions for us? 314-614-4944.

Thank you,
Andy
Click to expand...

Sounds like you're in my neck of the woods.

Drewthecarguy · Sep 9, 2023

Yea with a 314 area code sounds like my neck of the woods too, I tried calling you no answer

19975lugger · Sep 9, 2023

Amazing!!

N64_Wallmaster · Oct 31, 2024

Drewthecarguy[OP] initial post: ↑

Hello thanks for visiting my build thread. Let me start off with a little bit of history.
I’ve done a couple builds with engine swaps and what not, I’m always looking for a challenge and something that’s not been done before or something different. I’ve done tons and tons of LS swaps in older trucks and cars but they seem to easy now a days.

My last build was a Duramax swapped 80 series Landcruiser and it was a blast to do and super challenging.

So after i sold the LC80 I bought this 2016 Tacoma TRD OR with fairly higher miles but was in great condition

My whole plan was to build a truck that I could do some over landing and I wanted to take a trip to Moab and hit some trails. I live in southern Illinois so I needed something that I could drive almost across country, go off-road and drive back home.

I know I needed to do a little bit of a build to take the Tacoma to the next level

Couple exterior mods, black out emblems, trd pro grill, hid headlights, Baja designs fog lights

Next was wheels tires and suspension
I went with Icon Stage 4 suspension with tubular control arms and remotes resis

Wheels and tires are SCS 17s with -38mm
BFG 295/75/17

After those mods it was time for the Moab trip and the truck did great

After the trip I realized the truck needed more power to be more enjoyable. Don’t get me wrong the truck does “ok” but driving on the interstate for hours and hours at a time and the constant shifting up and down, and the truck struggling to get through the mountains in Colorado I decided this truck needs power, everything else about the truck is great, it looks good, comfortable, great off road, but just a turd

So that’s where it all started

I done tons and tons and tons of research before choosing the right power train,

Original plan was a LS3 with 6l80 transmission to keep things simple and be plenty of power

The major problem I came up with for engine swapping a 3rd gen is clearance, the trans tunnel opening isn’t very big and the front crossmember and front differential is all in the way, for a LS or LT to work it would have taken a knurly oil pan or a Dry sump pan

I didn’t feel like dishing out the money for a dry sump setup or hand making a pan

So what I went with was a LF3 out of a 2015 Cadillac CTSV sport. It’s a twin turbo V6

On paper it makes the same amount of power as a LS3 but in a smaller package

The LF3 has an almost flat oil pan all the way from the crank pulley all the way to the transmission pan

After the engine arrived I pulled the OE engine out to see what I had to deal with
And I sat the LF3 in for the first time to see what it was going to take

A couple things had to be done to the engine to have it sit where it needed to go, oil filter and oil filter adapter had to be removed for the engine to clear the front differential

So on the oil filter adapter I removed it, cut it in half, taped the holes in it, thread a -10an adapters in it and just relocated the filter to the frame rail

So the engine mounts from the Cadillac alllllmost laid out perfect to hit the factory Tacoma mounts but I ended up just making my own engine mounts that use the factory Tacoma rubber mounts so I didn’t have to cut anything up from the truck

Next I tackled the transmission cooling, back in the day I use to use the radiator transmission coolers until I decided it’s so much easier to just run remote coolers

So I adapted the stock Cadillac transmission cooler lines to 6an and mounted a cooler with fan under the truck

Next hurdle was power steering

Most modern GM vehicles went with electric power steering and the LF3 was no different

I could have figured out how to mount a pump on the engine like a lot of guys do with LT swap but I wanted something more simple so I went with a Volvo S40 power steering pump

I mounted it behind the front bumper and you can reach it from the top of the grill, worked out perfect

I ran some russel 6an power steering Lines under the radiator and worked out great

Next a couple goodies it needed

Gotta have a CSF radiator to help keep things cool and I went with ZZP downpipes

Next was transmission shifting,

My duramax swap in my 80series I used a Lokar shifter and I always had a problem getting out of Park and it drove me nuts so I told myself I wasn’t going to do that again

So I went with PCS electric shifter
I had a buddy of mine with a laser cutter cut me out a perfect hole for the remote in a piece of aluminum, I then did a small bit of trimming in the center console to get a nice flat surface for it to sit in and it turn out great, I think I’m going to just brush the aluminum and clear coat it and call it a day

Next I went with a ZZP intake for a Cadillac ATSV and it fit perfect in the Tacoma, I’m going to relocated the battery to the passenger side since I won’t be using the stock intake anymore

Also from ZZP i picked up one of their heat exchangers and high volume water pump that I mounted behind the front grille, fits perfect in the behind the grill, they also included a stencil with it if you wanted to put a logo on it so I did

I also picked up a awesome fuse box setup from Overland Equipped, that way I can power my heat exchanger pump, power steering pump, and all the engine swap power easily and neatly

Installed a 2018 Camaro SS PWM cooling fan onto the CSF radiator and it worked out good after making a few small brackets

Intercooler heat exchanger reservoir mounted and plumbed and everything flows nicely, the CTSV sport has a sealed system from the factory and that was the number one complaint was, air in the system and how much it sucked to bleed it. So I went with a open system and plugged the bleeder port with a fitting I had laying around

Fuel system is done, I should have taken more pictures but i forgot, I mounted a Aeromotive 340 in a Second Gen bucket, 3rd gen Tacomas have a awesome PWM brushless fuel pump but it’s returnless and hard to control, so I went with a 2nd bucket that has provisions for a fuel return. I then went with the basic LS swap configuration, corvette fuel filter, regulator to a -6an fuel line up to the rail

and thats pretty much it
I’ve been driving this thing working the bugs out for a little while and I can say it was all worth it, it’s way quicker, gets into 8th around 50mph and doesn’t hunt for gears, interstate cruising is worlds different then stock, I still have things to do to the truck like finish 4wd but that will come soon for now enjoy the pictures and any questions let know

Video is up on YouTube

https://youtube.com/watch?v=hon0w5MsXJg&feature=shares
Click to expand...

GOALS!!!!!

Log in or Sign up

Welcome to Tacoma World!

My engine swapped 3rd Gen build thread

#201
lm546 Well-Known Member

#202
Drewthecarguy [OP] Well-Known Member

#203
Just_A_Guy Rain is a good thing

#204
Naveronski Well-Known Member

#205
Drewthecarguy [OP] Well-Known Member

#206
Naveronski Well-Known Member

#207
Squatting Pigeon Remember, bird watching goes both ways. Moderator

#208
Squatting Pigeon Remember, bird watching goes both ways. Moderator

#209
Squatting Pigeon Remember, bird watching goes both ways. Moderator

#210
johnw Well-Known Member

#211
NastyBogging Well-Known Member

#212
GC23 Member

#213
BlondeBTCH Member

#214
hayrider2.0 Over the hill and going down fast!

#215
Amrc New Member

#216
CygnusX191 Gangster of Boats

#217
Drewthecarguy [OP] Well-Known Member

#218
19975lugger Hand-me-down

#219
N64_Wallmaster Carolina Cajun

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

My engine swapped 3rd Gen build thread

#201 lm546 Well-Known Member

#202 Drewthecarguy [OP] Well-Known Member

#203 Just_A_Guy Rain is a good thing

#204 Naveronski Well-Known Member

#205 Drewthecarguy [OP] Well-Known Member

#206 Naveronski Well-Known Member

#207 Squatting Pigeon Remember, bird watching goes both ways. Moderator

#208 Squatting Pigeon Remember, bird watching goes both ways. Moderator

#209 Squatting Pigeon Remember, bird watching goes both ways. Moderator

#210 johnw Well-Known Member

#211 NastyBogging Well-Known Member

#212 GC23 Member

#213 BlondeBTCH Member

#214 hayrider2.0 Over the hill and going down fast!

#215 Amrc New Member

#216 CygnusX191 Gangster of Boats

#217 Drewthecarguy [OP] Well-Known Member

#218 19975lugger Hand-me-down

#219 N64_Wallmaster Carolina Cajun

Products Discussed in Entire Site Forum: 3rd Gen. Builds (2016-2023)

#201
lm546 Well-Known Member

#202
Drewthecarguy [OP] Well-Known Member

#203
Just_A_Guy Rain is a good thing

#204
Naveronski Well-Known Member

#205
Drewthecarguy [OP] Well-Known Member

#206
Naveronski Well-Known Member

#207
Squatting Pigeon Remember, bird watching goes both ways. Moderator

#208
Squatting Pigeon Remember, bird watching goes both ways. Moderator

#209
Squatting Pigeon Remember, bird watching goes both ways. Moderator

#210
johnw Well-Known Member

#211
NastyBogging Well-Known Member

#212
GC23 Member

#213
BlondeBTCH Member

#214
hayrider2.0 Over the hill and going down fast!

#215
Amrc New Member

#216
CygnusX191 Gangster of Boats

#217
Drewthecarguy [OP] Well-Known Member

#218
19975lugger Hand-me-down

#219
N64_Wallmaster Carolina Cajun

Products Discussed in