What Have You Done To Your 3rd Gen Today?

And you can’t even use them in a street brawl!
https://www.truckknucks.com

 

Cool, I just have to wait for them to restock in February…

 

Received the new KDMax v10.0 tune, flashed it myself with my OV Tune?Tactrix cable, and license. So smooth, and seamless. it is waaaay better than the stock ecu ever was. huge improvements over the original OV Tune, and 2.0. each version of the KDMax stuff just gets better and better. the more parameters OV gives the tuners, the better these tunes, and our truck get. I need more time on it, for an honest review but, if the 50 miles I just drove, after the flash, is any indication of what is to come... I know it is going to be great. holding gears longer, throttle sensitivity is great, passing power, downshifts/upshifts, & speed/power delivery, through the tune are awesome. I did a 55-95mph run on a straight back road, with no traffic, it was pretty impressive. If you are on the fence, this tune, and this group, are awesome to work with. go get you some! Ski

 

@Mark77

Yeah, I thought so too. ($99.99/PR and 2PR are required $199.98)

See if Chloe Kuo's 5% off works..."CHLOEKUO".

I think I'd get Total Chaos Bed Stiffeners first...those are $179.37 for 1PR but they are out of stock.

 

Updated the truck to the newest kdmax pro 10 tune with sport throttle. It’s even better than before, really smooth shifts and holds gears like it should’ve. I’ve had every tune starting with kdmax 6 and every time they out do themselves making it just that much better

 

Yeah I had the opportunity to flash KDMax Pro 10 today myself. Updates are always one step better than the last. Can't wait to see what the Pro 10 has to offer. Thanks PapaRee! Your a great man to deal with and I know you always have my back when it comes to flashing tunes. I've never had a problem but I know you'll walk me out of it if I do.

 

Drilled out the drain holes in the bed to be useable and got a tailgate lock

.

 

A few mods installed. Gotta love Memorial Day sales.

• OEM power tailgate lock
• OEM air flow accelerator
  
• RCI bed stiffeners
• Diode Dynamics Elite amber fogs

All the mods were straightforward and fairly easy to install. The most challenging part were the cable clips between the bed and tailgate for the tailgate lock cable.

That should be it for mods for a little while. In order to keep the peace I probably need to cut down on boxes being delivered to the house.

 

Pulled the Morimoto XB license plate lights out and reinstalled the oem 194 bulb pods. Didn’t even make it a year before one of the led pods failed over half of them are out. Got an email out to check warranty so we will see. Hard to see in the pic but I’m pretty sure only one of the LEDs was lit up.

 

Added RCI sliders!

 

NICE I am in Canada, when I ordered my 22 I had the choice 3 col, I went with white

 

Finally got my 43in light bar installed. Just in time for my trip to WV in a few weeks.

 

Mine didn’t stick good there. Placed on mirror. Driver side in board low. passenger side inboard high.

Low on driver side since it was less in my way there. On passenger side high was fine

 

I fabricated a simple a tool from two paint stir sticks to hold a razor blade and sliced that sucker off. PITA it was but didn't damage plastic bracket.

Damn rodents.

 

I successfully flashed the OTT Magnuson tune today. I went with the lite-mild combo, so far so good! Going up in them there mountains next weekend, will test it a bit more.

 

Updated KDMax from v9 to v10. I don't have any road time with it yet, so there's something to look forward to this week. V9 was great, so I'm excited for the update. And as per usual, customer service is outstanding.

 

it would still be brighter than the 194 bulb

 

Nice work!

 

Dang, sweet truck!