What Have You Done To Your 3rd Gen Today?

You may want to get some of those half-plates that cover the top portion of them if you use your camera to back up at night. Ask me how I know… sh**s blinding.

 

PM’d you a link.

 

You can go to a craft store and get them too like Michael's and AC More , or Hobby Lobby. They have them with Multiple colors too.

 

There is also a harness that will shut the plate lights off when you go into reverse. I have this on mine and it works great.

 

Installed 2 renogy 175w solar panels + a bracket/switch for the winch

 

What hidden winch mount do you have?

 

Link, please?
I found this one. Just wanting to make sure it’s the preferred one to get if there are others.
https://fbchs.square.site/product/toyota-tacoma-2016-license-plate-light-dir-disable-in-reverse-/2

 

Yes, that's the one. They are a member on here.

Here is the thread on it: https://www.tacomaworld.com/threads/diy-license-plate-light-disable-in-reverse-harness-dir.698558/

 

It’s made by SDHQ
https://sdhqoffroad.com/collections...t-toyota-tacoma-sdhq-built-hidden-winch-mount

 

Any hardware store or Amazon if you’re like me and lazy lol

 

I still have to make some for myself, but from the pictures I’ve seen of them installed they’re still very bright. Plus, I figure LEDs are already much brighter than the stock bulbs, so even if they’re half covered they should be fine.

 

The grille is obviously a foreign ripoff, and you can tell from the stock picture as well as the generic, broken english in the post that the op is a foreigner as well

After that post, the OP also responded to a question that was asked by another member (to another member) with a simple "Yes." lmao

And the cherry on top is that the profile says "2018 TRD Pro" yet the post was about upgrading to a pro grill

 

RED IS the Fastest color

 

ok thanks.
I got one from RCi, but they don't make or support them any longer.
Did you do your own install? If so, any tips?

 

Installed Cali Raised Premium rack on my buddies Taco. Nice, but I don't understand why it doesn't include a wiring harness for the 360 lights, pretty lame.

 

Coolant over flow reservoir tube was weeping coolant, installed spring clamp.

 

Nice work. Did the same thing on a set of DeWalt tools with

$10 Forney 70822 Marker, Paint, Yellow, 1 Count (Pack of 1)

Forney 70822 Marker paint marker. Almost impossible to read the sizes before that. Über tedious but really worth it.

 

Polished and waxed my paid in full 18 BBP Sport! Clay bar, Meguires mirror glaze using DA polisher, Collonite 845. Looks great!

 

Beeeeyewtifull! My second favorite color. Love 'dem wheels too. Looking for something like that for ours. Can't quite tell the brand.