What Have You Done To Your 3rd Gen Today?

Have you connected and read the faults on obd2 ?

 

I disconnected and reconnected the battery and it fixed the issue. lol

 

I didn’t know that. Thanks for the info. Was going to order the harness to turn off the plate lights when in reverse. I’ll try this tonight.

 

I mean it is the tag lights because that’s what causes the clarity issues but the cause is from the camera, it’s just easier to switch light settings (like you did) than it is to switch the camera programming haha.

with that being said, the harness that shuts them off is pretty dummy proof and easy to install but I get it if people don’t want to spend the $. I personally just don’t like to shut off my lights when moving

 

Replaced the serpentine belt on my 2018 with just under 48,000 miles. Was getting a squeal in the mornings. Tried some belt conditioner spray which only made thinks much worse.
Replaced with Continental Belt 4070834 at Autozone for those who are interested. Cost a little over $36 vs $96 at the dealer.

 

https://www.youtube.com/watch?v=_ChQK8j6so8
We need to talk about your flair. You see Brian over there? He has 37 pieces of flair.

 

Trying to get a wire harness for my new brake controller is turning into a nightmare... Ordered 2 now, both are stuck in USPS purgatory, Hoping at least one of them shows up by next friday or my brake controller is getting the good old spade terminal and electrical tape treatment.

 

Didn’t do too much other then drive it today and hit a milestone.

 

FINALLY got her lifted. I have no experience with the other brands that other people in here talk about, as I used be exclusively into cars before this. I went with Icon 2.5s with remote reservoir/their tube-style upper up front, Icon 2.0s with RR in the back and an AAL. I don’t have a lot of added weight, and it’ll be a while, so this should do fine for a while. It rides soooooo much better than the stock suspension (a semi-rough 40k miles on the original suspension). We will see how it is after it has settled in.

 

They make an in bed headache rack that mounts to the bed slider rails so it’s fully adjustable..

 

I got rid of 14lbs of plastic & aluminum and added ~83lbs of steel.
I got the Body Armor 4x4 Pro Bumper on sale for $510 with free shipping over Memorial Day. I still need to add some pod lights to it.
Not a perfect bumper but an okay one for the price point.

 

Added a Statler Toyota patch

 

Now that you have the rain protectors in you can leave the windows down slightly which will reduce the inside temp of you vehicle considerable in the summer.

 

Trying to keep the cab noise down.

https://youtu.be/d2M2JuUG_FQ

 

Yesterday we finally got sun so I took advantage and installed my factory tailgate remote lock

 

Damn, I like it.

 

Interesting, i installed mine down the drivers side of the vehicle and under it, tough getting my hands under the vehicle in tight spots. but i did it. i didn't use factory i used an after market kit, but works just as well.

 

I’ve seen a few posts about bed stiffeners lately is it just a feel thing or is it very noticeable after they’re installed?

 

My DRL are still on. Not blacked out by any stretch of the imagination. Also have fogs available if I think I need them (separate switch).

 

Sure do like that Smokey the Bear patch!