Harness

Greetings. Any idea what this harness belongs to? Located rear of the bed, drivers' side 2020 TRDPro Thanks!

 

I think I read about this somewhere. Correct me if I’m wrong.
I believe that is the wiring for your “bed light”. See that blank they’re on the right, that is where the fixture sits, and you plug it into your mystery harness.

And yes it will work it is connected to the other end to have power.

 

Does you bed have a cap on it?
A lot of the caps came a connector for the 3rd brake light and/or interior light.

If it’s factory wiring, I bet @caribe makaira will know.
That guy knows just about ever plug there has ever been on a Tacoma.

 

That's not a "Toyota" connector.

 

I figured you would know.
Thanks.

 

It's a molex connector that's not even waterproof. If I had to guess, previous owner had a shell or tonneau cover.

 

Thank you all. It does have a tonneau cover from previous owner. I see the blanks you were referring to, but no light fixtures to be found.. Any suggestions om some cool amd functional bed lamps?

 

Since the Taco has the covers for some bed lights, you could add any LED's of choice. Surface mounted on that cover, pointing to where ever needed and some receiving plug for some under the bed rails strip LED's.

 

DON'T TOUCH IT!!!

that's the worlds revolution controller plug! if you connect it wrong bad things happen to the planet!




no, i don't know what it is, but it's not factory, which means that it could be any device offered by any company that requires a maximum of 20A at 12v.