295/75r16 & 295/70r17 PHOTO THREAD.

Well here's the outcome. Pleased with them so far. But Time will tell. Still need to break them in some.

 

@7six239 that's hilarious. Your truck looks much better than that! Lol.

 

any rubbing with the 295? im running same spec TE's. Got CMC as well.

 

295/70r17 Toyo R/T’s

 

Motegi 17x8 trail lite
Radar renegade 295 70 17
Fox 2.5 dsc all around (old setup)
CMC


New setup rear shock relocate fox 2.5s 12" w/ chevy 63 leaf springs

 

Could I run the Coopers XLT in 295/75r16 with STOCK UCAs??

my wheels are 16x8 0” offset

 

From my research yes. Joining the club next week w/ 295 XLTs on stock UCAs, 16x7.5 FJ wheels at +15. Wish me luck

 

Please report soon as you get them mounted. Mine are 0” offset and if you can fit then so can I.

 

Quick report is very slight contact to uca at full lock. I mean barely. I will post pics by this weekend and flex it all some more. Based on my math your center moves out .6" with 0 offset, but you loose .25 going from 7.5 to 8" width, thus net .35" further out then me. That should be plenty.

 

I was just thinking the same thing.

I have 285/75/16s and feel like the 295s look so much beefier, even with my wheels being -15 offset.

 

Looking very promising for me then. If your pics with flexing clear, then I’m 100% getting these for my next set.

I appreciate your feedback. Thank you.

 

So, currently I'm running 285's with knockoff TRD Pro wheels at a +5 offset. This only required some minor plastic trimming at the back of the wheel well and I did a viper cut in the front, so I am all clear there. I'm not vey close to the UCA or the cab mount at the moment. Do you guys think I'll clear with 295's?

 

Looks like you're barely kissing the UCA in those pics; how will you address it?

 

Pushed caster hard on allighnment to make room, will see if dialing it back might help or if i can live with it. Have to be at full lock for it to touch and even then its intermittent and very minor. I was suprised as i have seen other reports of this wheel and tire combo with no rub. If i have to do spacers i might just go back to stock wheels, love the stock+ look

Anyone who knows alighnments have thoughts on those numbers? 2.7 caster on stock UCAs is unheard of, not sure how they did it

 

What is the offset on your wheels?

 

+15 16x7.5

 

This makes me hopeful that I won’t rub on mine with 0 offset.


Would mine being 16 x 8 have a negative impact?


what about your Cab mount. Any rubbing there?

 

I’m really debating between this size and 285/75/16!!

 

Go bigger, you'll be glad you did.