What Have You Done To Your 3rd Gen Today?

Heck yeah bro. It was a pleasure meeting you!! Thanks so much for your support and I’m glad we were able to get you set up with some sliders!! Glad the kid loves them and the wife doesn’t hate them

 

Got in my mounts I created, as well as the GMRS antenna I wanted. Got both the cables ran into the cab and the GMRS antenna connected. Just need to debate: mount my Uniden Bearcat SSB, or get a one of those all in one handheld CB radios.
Also remounted my recovery boards lower and lubed the locking knobs (which was needed after several years of being on two different vehicles)

 

I’ve been slowly adding to my camping bed setup and finally pulled the trigger on some five foot drawer slides. After the first camping trip with the kiddos I just decided it would be easier to make a drawer to keep food, pans, etc organized. Happy with how it turned out!

 

Added this 6000 lb beast to the tongue and hauled it through the City for work. Taco was not as much of a dog as I thought it would be. Comparable to the 4000 lb unit I lug around all summer. Full weight distribution and break controller.

 

I used it. Went off roading in my backyard (Sedona AZ). This is my first Tacoma and only a month old, but I've already adopted the (totally overused) Taco Tuesday. I go out and play on Tuesdays.

 

That’s an awesome attitude, not to mention an awesome backdrop!

 

I concur!

 

That is an awesome setup! Wanted to do something similar when I had my’17 AC with the shell. Have a tonneau cover on my ‘21 DC now and just store recovery gear, etc. Looks like a solid, functional solution.

 

Did some 80 mil Noico deadening on the back wall of the cab to try and see if I could help the rattling / less than stellar bass I get out of my setup. I also did some work to the inner doors with more Noico and Fast Rings. I am reluctant to put any deadening on the outer door skin since I'm worried it might retain water and cause rust. Time will tell if I've made any improvements, but it was an entertaining enough project although I'm upset I damaged my LED footwell light kit, I think.

 

Well the part I ordered 2 months ago from Tacomalifestyle and have been trying to cancel repeatedly just shipped... So I guess I'll be fighting a return shipping and restocking fee with them for an item I have been trying to cancel since before it was even made... They've been ignoring me.

PSA: TacomaLifestyle is absolute garbage. There's so many options out there, even if some people have had good experiences with them (I had up until this point) take this as a warning, and use a different vendor.

 

Installed Dobinson's snorkel

 

Do you make those mounts?

 

Thanks for the heads up, appreciate it. I ended up picking up a set of RRW Bead Locks and my 37s just got here yesterday.

 

No existing wires for my truck. The heating pads come with a harness that has quick connections for both seat pads along with control switches and power wiring.

I've yet to wire mine in as both seats are ready. It appears a fuse tap for the open sunroof fuse, a ground and another wire for power when lights are on. I'll be doing some YouTube searches before I make those connections.

 

Hey, I need to do this exact same thing on my 20. Would appreciate if you could share where you got the replacements and run into any problem installing?

Order placed, for local pickup at Dealer. Thanks!!! $7.80 +tax.

 

Are you connected to the tiger mountain repeater? It’s a great repeater for the west side of the state.

 

Stared at the volume knob sitting at a traffic light, confused as hell. My other half had just called and not being able to hear her, I turned the volume up all the way to "max," and yet could still just barely hear her. I had the driver window cracked, so I raised it back up, which only marginally helped. I don't understand this, my 21' 4Runner at half volume was more than sufficient. Will investigate after work.

 

Here is the link to where I bought them, would have gone with stealership but they make up for the low item price by jacking up the shipping cost.

https://www.ebay.com/itm/221970829093

Install was easy, watched a youtube vid for a refresher.

 

Six dollars ($6) a piece from a local dealership for me. Luckily no shipping cost added.
My originals also lasted 5 years. Always cleared the glass perfectly - right up until one ripped lengthwise. So I went OEM again. Will see if they repeat their performance for another 5+ years.

 

Just mocked a shifter rod for crawl box going in. Bent the rod into shape, the bolt will be welded on to be able to thread the shift knob on. I will be posting the build, progress on @4x4slowcoma in instagram