What Have You Done To Your 3rd Gen Today?

Do you make those mounts?

 

Thanks for the heads up, appreciate it. I ended up picking up a set of RRW Bead Locks and my 37s just got here yesterday.

 

No existing wires for my truck. The heating pads come with a harness that has quick connections for both seat pads along with control switches and power wiring.

I've yet to wire mine in as both seats are ready. It appears a fuse tap for the open sunroof fuse, a ground and another wire for power when lights are on. I'll be doing some YouTube searches before I make those connections.

 

Hey, I need to do this exact same thing on my 20. Would appreciate if you could share where you got the replacements and run into any problem installing?

Order placed, for local pickup at Dealer. Thanks!!! $7.80 +tax.

 

Are you connected to the tiger mountain repeater? It’s a great repeater for the west side of the state.

 

Stared at the volume knob sitting at a traffic light, confused as hell. My other half had just called and not being able to hear her, I turned the volume up all the way to "max," and yet could still just barely hear her. I had the driver window cracked, so I raised it back up, which only marginally helped. I don't understand this, my 21' 4Runner at half volume was more than sufficient. Will investigate after work.

 

Here is the link to where I bought them, would have gone with stealership but they make up for the low item price by jacking up the shipping cost.

https://www.ebay.com/itm/221970829093

Install was easy, watched a youtube vid for a refresher.

 

Six dollars ($6) a piece from a local dealership for me. Luckily no shipping cost added.
My originals also lasted 5 years. Always cleared the glass perfectly - right up until one ripped lengthwise. So I went OEM again. Will see if they repeat their performance for another 5+ years.

 

Just mocked a shifter rod for crawl box going in. Bent the rod into shape, the bolt will be welded on to be able to thread the shift knob on. I will be posting the build, progress on @4x4slowcoma in instagram

 

Yep. The two mounts for the recovery boards are a few years old, having made them for my old Crosstrek.

The two antenna mounts were recent creations; drawn up on adobe illustrator, briefly rendered in TinkerCad, then sent off to SendCutSend for waterjet, bending, and powder coat.

Just don’t buy the bed nuts from Cali Raised LED. Half my order wasn’t threaded, covered in metal shavings and dust, incorrectly sized holes created, or a combination there of.

 

I think I have it saved, but can’t confirm if I’m being received or are transmitting correctly. Would need to spend some time with someone to verify freqs and codes.

 

Next time try turning up the volume on the phone itself. I bet that fixes it.

 

Just for your information, if you're buying online you can select to have your Toyota part shipped to your dealer and then you can pick it up for no shipping charges added. Check out my post above I got the OEM blades from Toyota online for $6.80/pair plus tax.

 

Well today I got to vent about TacomaLifestyle and had to publicly call them out on here to FINALLY get a response from them (But still no resolution). Because emailing them repeatedly didn't seam to work... Productive day I guess?

 

Hey Carson, I got your calls and text's. There's no need to move this conversation behind closed doors. We tried private communications with the multiple cancellation emails I sent prior to this. Please send me a prepaid return label for the item I have repeatedly tried to cancel, and issue a full refund. You can wait until the item arrives back to you to issue payment. that's fine..

https://www.tacomaworld.com/threads/tacoma-lifestyle-review.780921/page-5#post-28833502

Paragraph 2 from my last reply in that thread cover's what I'd need to have this "fixed asap." Thank's. I'm actually really looking forward to being able to just shut up and go away.

There was also a part in there about a different order that I have with you, that is weeks behind to ship, and I would like to cancel that order too so that I can go with a different vendor. (Before you ship it to me this time please, I REALLY do not feel like paying restocking fee's.)

 

They made me right.

 

Installed some new-to-me Pro halogen housings I repaired using @Firn 's headlight replacement/reinforcement tabs. More detailed write up here:

https://www.tacomaworld.com/threads...nforcement-repair.795768/page-3#post-28833666

 

Sedona is an amazing place. I purposed there a couple of years ago. Cant wait to go back.

 

I did. IPhone 11 Pro. No change. Made sure phone output paired to the truck of course. Nav is also hard to hear, like too low to be audible. On the flip side, music streaming works great, good volume range as well as with ordinary radio stations.

 

Comin along. Just visualizing.

@4x4slowcoma