What Have You Done To Your 2nd Gen Tacoma Today?

I have the same rims, where did you get your center caps? Thanks.

 

I also used the Idata Maestro for steering wheel controls if you want those to work vs splicing wires. Direct plug and play. You can pre program the Maestro to have the buttons work how you want them too.

 

Made a mount for a breaker on my second battery.

 

Repainted the license plate light covers. Using Duplicolor's trim and bumper paint. Love that stuff. Lasts for a long time. I redid all the plastic trim about a year and some change ago and still looks black.

 

Finished my bumper and winch and then through a dash cam on

 

I need to do this! Looks good.

 

That paint is amazing. I won't use any other product to restore trim and plastics. It's not like spray paint either although goes on like spray paint.

 

I see that Auto Zone sells that paint. I’ll swing by after work today and pick up a can.

 

Well guys, it worked WAY better than I expected, almost too well. Kills all drone from 2500-3000. I tried to record it but it doesn't really capture it.

I used a 2.5" mandrel bend and 3" exhaust tube(both stainless). I capped with 18ga 304 SS sheetmetal. There is 5.75" of length in the bend and 18.5" in the 3" tube. I tuned for 125hz at 300deg F.

I'm super satisfied with the outcome.

 

Do you have an aftermarket y-pipe or headers? Also, what resonator is that before the J

 

You should be able to transfer your subscription. Sirius was sued over this a few years ago. It’s like $35 so long as you paid for the subscription and it wasn’t some complimentary thing.

I had my lifetime transferred to a Sirius XM sxv300 tuner so every time I get a new stereo I just transfer the tuner and make sure the stereo is XM capable.

 

It's all stock except I raised the crossover pipe to clear my skid plate. It's a cheap Amazon resonator that I installed at the beginning of my quest to kill the drone. It didn't do much.

$37 A-KARCK 2.5" Inlet Exhaust Resonator, 2.5" Inlet 2.5" Outlet 11.5" Overall Length Muffler Resonator Stainless Steel Polished

https://www.amazon.com/gp/product/B082F125B4?ie=UTF8

 

Thanks. Found that out and saved the court order just in case they want to give me a hard time. The big thing is to see if I can use the factory xm module.

 

2013-2019 Toyota 4Runner TRD Wheel Center Cap PTR20-35111-BK | Toyota Parts (mcgeorgetoyota.com)

 

I did the same thing a little while back too. It makes such a difference.

 

Drove it for the first time since last week's back surgery. Never found the driver's seat to be super comfortable but it was quite good in this situation.

 

I had my back surgery 5/5/23 and now I too can drive without pain.

 

Just curious, was the surgery for sciatica or some herniated disk?
I’m holding back from seeing a back specialist because I’m unsure if they’ll just say I need surgery right away.

 

Strange then that you had a drone with all all stock exhaust

 

This one (this is my 3rd time having back surgery) was to remove a bone spur and a cyst and also to grind down a little bit of a disk in my lower back.