What Have You Done To Your 2nd Gen Tacoma Today?

I'll take your old Fumoto valve if you still got it

 

Finished up the overland rinse/shower system for the taco. Everything sealed with marineweld.

 

Custom mount for my switch panel.

 

Started my rocker panel repair. Was super nervous to make the first cut, but figured it can’t get any worse than it is.

Before:


After cutting:

 

You have a YT video to follow building this thing? Looks cool.

 

I think I'm gonna hold on to it for now, I may change my mind and put it back on.

 

I used this as inspiration, but I already had the LCI can and an extra lid from the last time I ordered four of them direct, they will chuck a spare lid into the box.

https://www.youtube.com/watch?v=eN7Zk-1SVx8

Safest Taco ever.

 

Sorry to repeat an earlier post but I just received confirmation and wanted to share. My front plate bracket, shown used on an SSO bumper by @WaitingOnMyR1T , is indeed the standard bolt pattern for fairlead openings on aftermarket bumpers. I wanted to be sure before making that statement. Fixed, not hinged, so this version will not work with a winch. Investigating making a hinged version down the road.

 

Took the Flux capacitor out

And made a platform for the Maligator

 

Ha did it look something like this?

 

Is there a Toyota PN for that Phalanx CIWS?
GO NAVY!

 

Atlas Kwikbay 7k

 

Nice

 

Lol, I was thinking IG88 on steroids

 

Wowzers! Mine never got that bad but the crack is in the same area, and a little bit above that area as well. With the bedside stiffeners in now I'm not worried about it cracking anymore as it's pretty solid now. You might wanna jb weld that up or something haha

 

Took the little guy on some dirt. He’s a big fan.

 

Nice little alternative to getting a different bracket. What a lot of people do (me included when I installed mine) is just wallow out the hole on the brake line bracket and slide the bolt that comes with the springs through the bracket and the U bracket you install the springs.

 

Do you live in Chesapeake? I just saw a Craigslist post of this license plate bracket lol. Same pictures and all.

 

The black clip did what now?

Not trying to be smart, I'm genuinely asking. Unless I'm using the black clip wrong (you're talking about the locking clip right?), it goes on....it comes off.....slot over the valve "handle"...should I be watching for something?