How to reset tdc marks on my 99 tacoma 3.4L V6 5VZ-FE

i removed my timing belt before setting the tdc marks on cams and crankshaft i turned the cams one revoloution each side and the crankshaft one revoloution without the timing belt on how do i find the tdc again for the cams and the crankshaft need help thank you

 

These are the best pictures I have. Each camshaft pulley has a notch that needs to be matched up with the corresponding notch that’s on the metal timing cover. The top picture shows the left pulley is off 180 degrees, it should be at the top like the right one. The crank pulley at the bottom has its own corresponding notches/marks too. Idk if this answered your question.

 

thanks for the reply if i turn the crankshaft over do i offset the firing order

 

I need to look you need to get the cam and crank in the right time.

It is not as simple as everything lined up by the timing marks.

i know how to get things lined up in my fashion.

Maybe someone knows off the top of their head .