What Have You Done To Your 3rd Gen Today?

I thought I got banned for a minute

 

A disruption in the force....

 

I think it's a leap year thing or is it.....

 

Kinda what I did but I split the USB ports so I could double my stored music. Found out after trial and error many "adaptors" don't work.

 

Undercover armor flex and OEM bed mat

 

Do you have any more details on how to replace that light? Not sure where to start beside what looks like you removed the climate control pannel?

 

Popped out radio trim bezel then the HVAC control panel below it. Both just pull out without tools or removing any bolts. Then you have to squeeze your hand in the gap until you find the bulb. It's one of those weird OEM style ones that matches no conventional bulb and twists 90 degrees counter clockwise to remove (I looked at the new bulb as a reference). Then just need to remove the plug by squeezing on the part you're supposed to squeeze on. Comes out pretty easy, much harder to fit your hand in to twist the new bulb in. They look exactly alike so pop on your parking lights real quick after putting the new one on to make sure it's blue. One of those installs that you have to do all by feel, but it's not too bad.

 

Z Precision large cup holder. Holds the big hydro flask and short fat yeti mugs. It’s only $50

 

260k Brake system overhaul. I low key wanted to go with the Powerstop KC136 and stainless lines - but I opted for Import Direct Pads, Fully Coated Rotor and Reman Calipers. The brakes were super easy, in the process I also replaced the passenger side hub assembly because the studs were all jacked up. I also found the passenger side cv shaft had a torn boot so that was replaced. Both SPC upper ball joints have play - ordered new ones, doing some reading looks like the replacements are updated…I hope so. The one thing I would really like to get away from is ET Thread Spline Drive Lug Nuts…but that’s gonna require longer studs.

 

New shift knob from Tinkerer.

 

Cali raised Led step sliders going on tomorrow if I can get my brother to come help. I'm buying the beer, he will be here. Lol

 

And a decal on the tailgate last weekend.

 

where did you get the cross rail? I'm looking for something similar to mount a kayak bracket on so it can sit at the level of the box sides

 

FTH !!!!

 

Hahahhaha FTA!!!!

 

I (accidentally) took the heat gun idea to the extreme and enlisted the sun. Parked outside on a sunny day, the tonneau cover got quite toasty because it’s black and metal, and all but a couple of the hundreds of hail dents are gone. I like this type of surprise.
@OBXPaul

 

Mine did the same thing awhile back but I did something and it went away. It was something so in significant that I forgot what I did to clear it. Sorry, I know that is no help, Just thought I would toss it out there.

 

That’s a nice knob. How do you like it so far?

 

AC Drain mod