What Have You Done To Your 3rd Gen Today?

Z Precision large cup holder. Holds the big hydro flask and short fat yeti mugs. It’s only $50

 

260k Brake system overhaul. I low key wanted to go with the Powerstop KC136 and stainless lines - but I opted for Import Direct Pads, Fully Coated Rotor and Reman Calipers. The brakes were super easy, in the process I also replaced the passenger side hub assembly because the studs were all jacked up. I also found the passenger side cv shaft had a torn boot so that was replaced. Both SPC upper ball joints have play - ordered new ones, doing some reading looks like the replacements are updated…I hope so. The one thing I would really like to get away from is ET Thread Spline Drive Lug Nuts…but that’s gonna require longer studs.

 

New shift knob from Tinkerer.

 

Cali raised Led step sliders going on tomorrow if I can get my brother to come help. I'm buying the beer, he will be here. Lol

 

And a decal on the tailgate last weekend.

 

where did you get the cross rail? I'm looking for something similar to mount a kayak bracket on so it can sit at the level of the box sides

 

FTH !!!!

 

Hahahhaha FTA!!!!

 

I (accidentally) took the heat gun idea to the extreme and enlisted the sun. Parked outside on a sunny day, the tonneau cover got quite toasty because it’s black and metal, and all but a couple of the hundreds of hail dents are gone. I like this type of surprise.
@OBXPaul

 

Mine did the same thing awhile back but I did something and it went away. It was something so in significant that I forgot what I did to clear it. Sorry, I know that is no help, Just thought I would toss it out there.

 

That’s a nice knob. How do you like it so far?

 

AC Drain mod

 

New wheel!

 

I can’t decide if I want aqua to match the console lights or red

 

I’m curious about the rear bumper protector and would like to look at the manufacturers website. Can I have the brand? Please!

 

Fingers hit just right.. I like it. Have a TRD velcro patch to replace the shift patern patch if I want

 

Swapped my lowly halogen headlight bulbs for a set of Lasfits’s.

 

avid offroad brush guard! They are out of Arizona and I got this one from a fellow TW member. Bolts up easily and didn’t affect my sensors right away, none of my BSM or back up sensors work with it on now. BSM malfunction could be for a number or reasons.

but I will say it’s proven it’s worth around town and in the Florida forests immensely.

 

Awesome! I’ve been looking to upgrade mine and ended up buying one.

 

My cousin got them from a forum member who made them. This was a while back. His screen name was KDVoodoo.