Official* New England Buy/Sell Tacoma Marketplace

@NoFear9491 good parts if you’re looking.

 

Is the section to the front of the soft topper canvas as well or is that clear?

 

The section up against the rear window of the truck is clear.

 

https://www.tacomaworld.com/threads/4x-3rd-gen-trd-offroad-stock-rims-w-tpms.797037/#post-28567190

200$. Someone come take these.

- Rubber: NO (Comes with tires but they're cooked)
- TPMS: YES
- Lugs: NO
- Center Caps: YES

 

Free to a good home...
I'm in central CT and Ive got a 10yo Undercover Flex Tri fold Tonneau cover that needs some love but is totally usable. It shifted off my truck and hit the ground when my truck got T-boned but there isnt any noticeable damage to it.
I did some work to this tonneau last summer reapplying heavy glue to all of the trifold joints/cable pull trays and replaced the rubber padding. You will need to do some work with the mounting points where the shock arms connects to the cover when its folded up and vertical. Those got old and rusty but still worked holding the cover up.

The old cover is sitting in the back of my truck after I picked up my truck from the body shop. Id rather offer it up on here than taking it to the dump right away. I got a new replacement Undercover armor flex tonneau from my insurance claim so I figured I would pay it forward with my old one. Best thing with the Undercover brand is that they don't rest on the cab itself (like Bakflip), they are supported by their own shocks.

You will get the tri fold, mounting rails, and all other hardware. Any replacement parts can easily be purchased online. Let me know. This is for a 5' bed 2010 DCSB

$28 Vepagoo ST270EDI-45 27" 45Lb/200N Per Gas Struts Shock Lift Support for Truck Bed Cover Undercover Topper Pickup Tonneau Cover and Other Heavy Duty Application, 2pcs (1 Pair)

Replacement Tonneau support arms.

Currently folded up in the back with the rails next to it. The rail clips are in a box.

 

Still have these. Tires and wheels from FJ cruiser. Ran these on my taco for awhile before just recently upgrading. Located in Central CT but travel to New Hampshire frequently and can bring with me.

https://www.tacomaworld.com/threads/fj-cruiser-oem-wheels.803414/

 

I’ve got some brand new warfab tie rod sleeves for Tacomas that I’m never going to use.. I’d like to get $80. Located 02726 but I’m willing to meet up within 15/20 miles if that helps. Will ship if need be. These are currently sold out, fwiw.

 

Bed extender with brackets.

https://www.tacomaworld.com/threads/bed-extender.804591/

 

Vooodoo cross bars and basket $200

 

@Johnny balls
That looks like my old rack....
To sweeten it up for someone, I found the cargo bag that goes with it..

 

It is indeed sir!

 

Bump!

 

I took the second overload springs out of my OME rear leaves when I had the truck. Brand new, took them out before mounting the springs. Make an offer, located in West Boylston Ma

 

WTB - stock wheels and stock MGM bumper, or bits. Found a 2020 6MT with low miles and pulled the trigger on it today. Looking to swap most of my current after market over and then sell my 2016 in stock’ish form. Any leads would be appreciated.

 

I got a set of 17" Sport rims with like half life stock rubbers. It's a set of 5 with a matching spare (not steelie).
If you plan on swapping most of the bits over, you could swap wheels and tires over too, no? Similar with the front bumper and headlights?

 

Shoot me a PM with details on the wheels. I realize I could swap them over, but it’s a CPO with warranty, so I want to at least keep it stock for a bit to see if there are any issues. My current wheel setups won’t work without a lift due to offset.

 

Would tire clearancing void the warranty? Cab mount chop, pinchweld fold and plastic forming? Just more of a general question.

 

Just on the things it effects, so frame probably and the cab body. Plastic meh
Magnusson Moss Act

 

Makes sense. Did a bunch of people get screwed by that in the frame recall?

 

I know of at least one occurrence. It really comes down to the dealer. I've pulled the Magnusson moss act out before at one dealer and they did the repair