What Have You Done To Your 2nd Gen Tacoma Today?

Rat snake.

 

I'm ordering a full set of steel cbi skids and a icon leaf pack. I have eibach coilovers on the front and their pro sport shocks on the rear. With adding the new weight and leaf pack I'm probably going to raise the coilovers a little. Should I buy a better rear shock or do you think what I have will be fine?

 

Funny thing is we were just talking about Lizards in NC and you posted this.

 

I have new Katzkin's leather Access Cab rear headrests covers in black to get rid of. Asking $100.00 , OBO.

 

you don't happen to have a part number for that lexus fill plug, do ya?

 

We do have a bunch of those eastern glass lizards here too. Lol

 

Replaced the brake pads, shims, and rotors. Anything that could be seized, was. Turned into a three hour ordeal. Don’t know how, but I managed to luckily have the right bolt to remove the rotor. The BAH was having no effect removing the rotor.

 

I didn’t want an expensive winch mount bumper, so when I came across this Hooke Road option, it was an easy choice. The lower plate needed some persuasion to line up the lower holes, but so far it’s looking much better than the stock one with the bird strike dent and broken trim piece…

 

Started my clutch replacement first 2 bolts of the job

 

That’s going to be a rough one, wd40 or pb blaster and spray every nut or bolt multiple times and blow torch before you start.

 

I'm just gonna weld some nuts to them when I get the trans down. Trucks been sitting since last year when I went to cali.

Something in the clutch system is stuck. And I'm due for one.

 

While I do agree. Mine is in surprisingly great shape. I got the sun visors upholstered, but I looked at the condition of the liner, and made the decision to paint. Had I seen any signs of deterioration, or wear, I would definitely have just upholstered. Also, mine has no foam padding to separate from. I thought that was weird.

 

Exactly 10 Sq feet if anybody was wondering. Access cab

 

I'm glad to hear they are working for you! I still feel really bad about what happened to that company. And what they did to their customers. Damn shame.

 

@kbvoodoo I'm blown away by the quality of these bed rail caps.

 

Installed new U-Bolts and then tinted my tail lights. subtle but looks alot better.

 

Those are the parts I used on my father in law's 2013 a couple months ago. Everything worked well after.

$68 TOYOTA Genuine Updated Blower Motor Resistor & Pigtail Connector for Tacoma 2005-2017 - Parts 82141-04Q80 & 87138-04070

https://www.amazon.com/gp/product/B07PV1BLCN?ie=UTF8

 

How difficult was taking off the liner? I really want to sound deaden my roof.

 

It’s not so much difficult as involved. Since it’s trapped by the trim below it, the SRS clips, the dome light, overhead console, and sun shades. Simple for each item just a lot of them. The good news is the clam shell doors make it much easier than a DC to get it out. If you can do it in conjunction with another project that also requires it. I’m my case it was roof tracks install.

 

Got a new toy to offset the tacoma fun. Man this thing will go anywhere.