What Have You Done To Your 3rd Gen Today?

Turned the check engine light on

 

I'm no mechanic, but please hear me out.
I think ... when you go to add more airflow to the engine ... it needs to come from factory approved holes.

sorry for your loss man

 

What's the story behind that?

 

Nooooo!

 

I did the pop n lock thing on my truck but I like the loud clunk when locking it. To me it says “yea I’m locked and leave me alone”

 

Can't like that.

 

part out ?

 

Damn that’s impressive!

 

Oh, SH!T!!!!

 

Mine are made out of 2x10s, incrementally cut and stacked. Small bit of rubber on bottom to stop sliding during initial contact.
Heavy AF, but absolutely no chance of failure, rust, melting, cracking, or termites.

 

Got a little off camber on an incline, shut it off once it started smoking. Double winched the truck up the rest of the obstacle, started it up, idled for 15 seconds and it blew up

 

Now we finally get to see what happens to a taco with a drop-in 1000hp crate engine!!!

 

For now I'm just slapping another 3.5 in, in the long future I'll probably do a 1jz or turbo k24 or something cool.

 

That is one sweet QS truck!!

 

That looks sweet. Did it come with the cover for the stock chrome connector? If not, where did you get it? Looks seamless (unlike mine)

 

Spent this weekend knocking out a couple interior upgrades that I've been meaning to do.

After disabling the useless Qi charger a few weeks ago, I wanted to repurpose its switch to control something cooler. Enter VLEDS aqua footwell lights. Pieced together my own kit with a dimmer and saved $80 over their pnp kit. Came out awesome. Super impressed with these tiny lights.



Next up was to remove the Anytime Backup Camera kit and rewire the front camera directly to the

$840 DMH-WC6600NEX Digital Multimedia Receiver with Wireless Apple CarPlay and Android Auto, 9" Floating Capacitive Touchscreen, Modular Double-DIN, Built-in Bluetooth, WiFi and Amazon Alexa

DMH-WC6600NEX. The ABC kit worked fantastic with the stock hu, but was not besties with the Pioneer. I then reflashed my Maestro to have the backup camera come on if I hold down the End Call Button, so I still have a physical button to load the rear camera. Haven't figured out to make it toggle the front camera with a button yet, but hopefully can figure it out soon.

Removing the ABC switch allowed me to install something else in its place so I added the OEM Glass Breakage sensor along with the small style Tundra mic (P/N: 08192-65810). The mic's are exactly the same on the back, but this fits the smaller cutout.



Longer post in the build thread: https://www.tacomaworld.com/threads/drizzohs-21-off-road-build.748190/page-12#post-28894541

 

Is there a maintenance step for this item? Have you ever felt this thing it feels very thick and restrictive for air flow.

For the guys who have replaced this with the red TRD air intake is there the same item on the lid? It feels like another air filter.

 

Per others, removing both the positive and negative cables from the battery and clamping them together for 10 minutes or so will drain the capacitors and "reset/clear" the system memory for a fresh start. Just removing the negative cable for a time will do the same, although it takes longer in my experience. Not dissimilar from replacing the battery.

 

So we're part of the "300" club!

 

Turned out awesome do you like the color of the V LEDs.? I agree the qi charger button is completely useless good job repurposing that.