Ontario BS Thread

That makes more sense - the wheel is there for bling appearance, not function, like jewelry.

 

This is the worst vehicle promo I've ever seen

https://youtu.be/G3uQcxdyAA0

 

@dblom14 dood, you're out of the brig...

 

What do you mean. the sold lavish offroad lifestyle cant actually offroad?

 

Basically proves that a manicured dirt road is "offroading" to anyone who would buy this

 

Some refer to it as farming but you’d have to make money then.

 

Better off using a commercial truck chassis at that height: https://unicatexpeditionvehicles.com/2022/05/18/second-hand-tc45-light-unimog-u2150l38/

 

Bumped into @Zephranthes on the trail

 

pricing starts at 75k. not sure if that is usd or Australian dollars
https://www.youtube.com/watch?v=HFAATL2FiIU

 

Wow

 

Aussie boomerang dollars = Canadian maple syrup loonies

At 75k, its so much better than that other... million dollar for f550 camper thing...

 

Well, I don't have $75k dollarydoos so I'll keep on keepin on

 

I just live by @tacoma16 's words of wisdoms

$75k for a trailer? I need $75 for bolts...

 

Just a reminder that the Bancroft Run is coming up this Saturday, July 8th. It'll be ideal for anyone that enjoyed the Newbie Run last month or anyone looking to run new trails.

https://www.tacomaworld.com/threads/bancroft-trail-run-july-8-2023.802343/

 

hopefully not like I did...lmao

 

Flies were vicious this last weekend.

 

I had the exhaust re-route done and am now waiting for my transfer case skid plate to come in.
My front (aluminum) plate took a decent hit - big dent. Should I try to pound that out, or just leave it? Am a little worried that smashing it back might weaken the plate?

 

leave it. If i can remember correctly there was a similar situation at ardbeg this year and after removing the skid to "bend it back" the mounting holes did not line up. There was a crowd looking on and chairs were strategically placed to get a good view.
So if you decide to remove the skid to remove the dent, do it in the fall at Ardbeg so we can continue from Mr. Shveet's example and make this an annual Ardbeg tradition. I'm not sure if anyone helped him, lol. The TEC became union workers for that brief period. lol.

 

You can try straightening it with non-impact methods - shop press, large vise, or bottle jack under the vehicle. Use a block of wood between the skid and hard surfaces. As aluminum is less stiff than steel, your setup needs to be able to bend the skid past flat to account for springback.

 

That was a steel plate and i made sure to entertain everyone as if i was going to execute someone


Also wake up call