Radio will not work

I had the dash apart to run a new USB cord up behind the radio. I have had the dash apart and the radio out several times in the past with no trouble.

This time, after putting it all back together, the radio won't turn on when I turn on the truck. I've checked the three fuses under the hood and they are all good.

What am I missing?!?


2019 Access Cab, Sport trim, MT.

 

Found a little bit of information on the forum in past threads, but not much.
I tried disconnecting the battery for a bit and reconnecting, with no success.
Next thing will be to check power in with a multi-meter to see if it's the truck or the radio. Does anyone have the radio schematic handy?

 

This may help…..

https://www.tacomaworld.com/threads/3rd-gen-stereo-wiring-diagram.582105/

 

Did you checked the fuses under the dash on the left hand side?

 

since you're seasoned at removal, I'd start by pulling it out again and seeing if anything was left undone the last time.

 

maybe its Closter phobic

 

Same thing happened to me, foolish mistake on my part and luckily only blew a fuse

 

Did you all hear about the gay electron?








It went around blowing fuses.

 

I knocked my ground wire loose behind the radio once.

 

I looked in there, but did not see any that are specific to the radio. Do you know of one that is?

 

Yep, first thing I did. Then I did it a second time just to be sure.

 

Interesting. Where is that located?

 

Do you remember which fuse it was, in your case?

 

Maybe this will help, under the dash fuse cover.

 

check them all

 

Sorry. It was a ground wire to my amp, not radio.

 

Alright. It's the best case scenario. I was just an idiot and missed a plug. Thanks for all that indulged me.

 

I’m sure it’s never happened to anyone else lol!