2020 parts list

I'm going to change the grille on my 2020 sr5 to one from a 2021 TRD (non pro) honey comb style grille. Will the Toyota emblem/TSS cover from my grille fit the TRD grille. If it doesn't or becomes damaged in the change over what is the correct part #?

 

The emblem for non-Pro trucks with TSS is the same for all models, 90975-A2014.

Jeff

 

Thanks
I looked that up it's quite expensive hopefully I don't damage the clips.

 

Work gently, but it shouldn't be too difficult to remove without damage.

Jeff

 

@Jeff Lange I'm having a bit of a quandary looking up original stock front axels for a trail spare. My axels have 43430-04701 marked on both of them, when I put that into the websites many come up with "not available". Like the axels have been discontinued and replaced. Have they been discontinued and been replaced by a subsequent part number? Like 43430-04701 was replaced by 43430-04700. Thanks

 

Success didn't break any tabs.

 

I bought mine on Amazon for $40 and have been great.

 

Hi, I’m looking to order some OEM led fogs for my 2022 tacoma TRD sport. the part РТ413-42191 for black seems to be the right option but when I look up the Tacoma equivalent
РТ413-42190 it only goes up to year 2021.

Does anyone know if РТ413-42191 will fit 2022 tacoma ?

 

While I’m here, can anyone recommend a good led headlight conversion for the same 2022 TRD sport? Thanks

 

Don't know the answer to your question but I would recommend this thread here. https://www.tacomaworld.com/threads/the-led-sae-j583-fog-pod-fog-light-review.554813/ Lot's of great info. I replaced my stock 2020 TRD Sport's fogs with a set of DD SS3 LED Fog Lights for 2016-2023 Toyota Tacoma in the selective yellow sports. Plug and Play. Great performance and quality. Easy install.

 

Again, lots of great info here. https://www.tacomaworld.com/threads/3rd-gen-hid-vs-led-vs-halogen-h11-projector-headlights.589465/
Best performing LED headlights for your truck are OEM.

 

would any kind soul with a TIS subscription be able to provide the installation instructions for this?

Hood Graphic PT747-35220-02

 

See attached, I think this should provide the information you need.

Jeff

 

Thank you Jeff! That will work.

 

I replaced a TRD exhaust/muffler with a stock exhaust/muffler (don't ask ) and I'm looking to replace the exhaust gasket that is at the connection after the cat back pipe and just ahead of the muffler. I found two posts but each one suggests a different PN.

https://www.tacomaworld.com/threads/2020-parts-list.619005/page-49#post-26329719 (suggests PN

$16 90080-43033 Genuine Toyota Exhaust Pipe Center Gasket

90080-43033)

https://www.tacomaworld.com/threads/2020-parts-list.619005/page-49#post-26394228 (suggests PN 90917-A6001)

Can anyone kindly confirm which it is?

TIA!

 

Follow-up to my earlier post about the exhaust gasket for the connection just before the muffler for anyone that follows. It's PN 90917-A6001.

I noticed some exhaust fumes when the rear cab window was open and after looking a little closer, found some condensation dripping from the joint when I first started it up. At about 45K miles, the old gasket was pretty worn out. Nice and tight now.

 

Hey, I'm looking for the P/N for the Sub-woofer/backwall garnish/trim piece (for vehicles with a JBL premium radio, it would be behind the rear seat on the driver's side).

Looks like the following:

 

64429-04080-C0

Jeff

 

Here is an option if you would like to add USB charging. I put on in my Taco and the wife's Rav. You will need an fuse tap, or similar to power it. It fits the spot the stock USB head unit connection on the dash.

Cllena Dual USB Port Charger Socket Quick Charge 3.0 & 2.4A for Toyota

Cllena Dual USB Port Charger Socket Quick Charge 3.0 & 2.4A for Toyota

 

Interesting. Do you know the trick to removing the switch area that it fits in from the dash assembly? I couldn't find a way to do it...