What Have You Done To Your 3rd Gen Today?

Thanks! I'll see how they are later tonight, but from the reviews and vids I saw on YT the output looks MUCH better than stock. I have terrible vision at night and the OEM lights even with brighter bulbs were just not cutting it for me.

 

I've had the wireless carplay adapter for a couple weeks now and it is working flawlessly. Thanks @TRDRed. I have the tape to tape it up under where the QI charger is, but I think I like this way better and won't have to worry about putting stress on the port of the truck from bending the wire under and it's easily removable. Just a 90 degree adapter from Amazon.

 

Snapped a few pics. Loving my Trail Edition. Still miss my 2nd gen though.

 

I gotta get one of these!

 

Happy to be of service! It's been a few months and our

Teeran CarPlay Wireless Adapter for Factory Wired CarPlay 2024 Upgrade Plug & Play Dongle Converts Wired to Wireless for Cars from 2015 & iPhone iOS 10+

wireless Car Play adapter is still working fine as well.

Thought about the stress on the port as well, but the adapter's wire is pretty flexible so no problems with mine. On the recommendation of @chstaco I've ordered a USB adapter that'll plug into the back of the stereo (where the USB port in the dash is connected now) which will allow me completely hide the Car Play wireless adapter behind the dash. The USB dash port will be "dead" but it's no longer needed with the Car Play adapter anyway. When I go to sell the Taco I can just remove the adapter and reconnect the stock wiring. I get a little OCD about those sorts of things, so that'll tidy it up a bit. The adapter is coming from Ali-Express so it'll be a few weeks before it shows up, but once I get that done I'll post a few pics.

Enjoy!

 

These are really nice. How much? Was the install difficult?

 

Well today I did quite a few things .. none worthy of photos.

Changed oil/filter
Rotated tires/cleaned up suspension
Checked/filled fluids
Touch up/re-painted exhaust
Touch up/re-painted rear hubs
Mavcoat the entire undercarriage/fenders

So far after 3 years and 50k my truck is basically rust free. It still looks new underneath.

I'm hoping to keep this thing for another 20 years.

 

$250 for the cab mount relo kit. Install price will vary depending on your location and shop. I did not do the install.

 

That would be a nice pic to complement your post.

 

Got this from fedex today.

had to open up the hole a bit for the Jl to fit. But wasn’t too big of a deal. Got it all fit and installed while my wife was out with some friends.

sounds much better than the kicker L7 8”
So I’ve effectively got a JL stealth box for a little more than half price. The only thing I’m missing are the brackets that come with the stealth box. It should sound just a little better once it’s mounted nice and tight.

 

I would bet that usb cable would work with my Carsifi android auto adapter too.

 

That's gonna look good!

 

Yeah . I don't have a lift so I can't get good pics, but here goes..... We have really only had one snowy/salty winter since I got this truck..it's tough to say how much the mavcoat protects. Ill keep applying it yearly.



These pics are bad, but you get the idea.

 

I installed the TRD "Performance" Air Intake this afternoon. Is there a noticeable difference? Yes, it's red.

 

This is the one I bought:

$6 Oxsubor USB 3.0 Adapter 90 Degree Male to Female Combo Vertical Up and Down Angle Coupler Connector

https://www.amazon.com/dp/B07C1Z552Z?ref=ppx_yo2ov_dt_b_product_details

 

Engine bay is really clean

 

I cleaned it pretty thoroughly while I was in there.

 

I'll be watching for when you get it done. Was thinking of this myself but hesitant on pulling that dash apart.

 

Your undercarriage looks VERY good! Congratulations on keeping it in top condition. Enjoyed the pics. I live in Florida so I don't have the salt to deal with I'm going to take a picture of my undercarriage later this week. It's time for an inspection.

 

looks impressive and it dries without sticky residue.