Pulling up reverse camera

Does anyone know how to bring up the reverse camera other than to actually be in reverse?

 

anytime reverse camera harness

 

The view button.

 

. Where the f is view button?!?

 

If you had the panoramic view on your taco then you'd have it.

 

The factory radio can have the anytime camera switch installed I believe.

 

I just put it in reverse. if you do it really quickly when driving down the street nothing happens, but the camera comes on

 

Uhhhh. I believe you. But that scares me

 

oops thought it was friday

 

My truck does not have panoramic view. I added the "Anytime Backup Camera" harness, and put the switch where the "View" switch would normally be. This mod has been one of the most useful (and most reasonably priced) that I have done.

 

I am wanting to do this. Waiting to buy the anytime backup harness. Just don't want their switch (it has front and rear on their switch). Where did you get this switch and does it have back lighting?

 

Sorry to bring up seemingly dead thread
Was this the harness you got ?
https://www.anytimebackupcamera.com/products/anytime-backup-camera
im trying to add option to turn on rear camera . I don’t have the front camera, I just want to be able to view camera if towing or recovery .
This site makes it seem like it’s for 4Runners but not sure

 

Yes, that's the one. Note that the version for model years 2020 and up is slightly more expensive ($43 instead of $39).

I used a switch from Air on Board ($15 plus postage). It has backlighting in Toyota blue (same color as the rest of the dash). To connect the lighting, I used a jumper harness from Kyle Morgan (member here). This was $20 postpaid. So all together, the project cost a little over $90.

 

Right on thanks . Just ordered the 2020 version. I appreciate it

 

otherwise, the camera really just needs a 6v signal to power up. many aftermarket 6v adapters on the market.