What Have You Done To Your 3rd Gen Today?

@bkhlrTaco's

And we shall call you..."Light Foot". lol

There's obviously lots of variables but the main one is our driving habits.

I've reached upwards of 350-370 on my display...and I'm satisfied with that considering it's a 3.5L engine w/22gl tank.

EDIT: And he fact, it's a mid-size truck.

 

Installed an awning nothing special had heard good things about the Napa awning for $140 too good to pass up on. Also swapped wiper blades. Once the day cools off I’ll finally get around to installing my sequential turn signals.

 

Not this time. I found a simple solution and just going to trim the fender liners a little when it get cooler out today

 

The I’m so gay one is gold. Might fuck around and get that

 

Yesterday I installed TRD Pro tail light housings with the VLEDS Vtails kit and replaced some knockoff black side mirror covers, which had faded and discolored a bit over two years, with OEM black covers. Chrome delete is nearly complete!

Today I installed the TRD intake flow accelerator.

Pro tails:
81550-04230
81560-04230

Mirror covers (color code 202):
87945-04070-C0
87915-04070-C0

Flow accelerator:
PTR03-35160-AE




OR tails:



Pro tails:



New mirror covers:

 

Today, I received my brand new Tail lights, they are off the older versions of the Tacoma. IMO i like them better then the ones that came with my Brand new 2023 TRD 4x4. I have changed LOTS of things on this truck so far

Before :

After :

 

Agreed. Older version wins on looks.

 

Looks great. Can you get a shot from farther back? Looks like Silver Sky Metallic, if so I have the same color. Would love to see more of the truck. Looks awesome up close.

 

Yup!



Now... get the VLED light kit and you'll be good to go!

https://www.tacomaworld.com/threads...ht-conversion-kit.790993/page-7#post-28564987

 

Put these steps on today

 

Close, it's cement. Here's a wider shot.

 

Because of local forest fires most back country roads are closed, so gave my OR a coat of Chemical Guys Butter Wax

 

Installed these C4 fab sliders fresh from the powder coat , found them on marketplace for a price I couldn’t pass up. Super stoked with the way they look.

 

Where'd you order the flow accelerator from?

 

isnt it easier just to convert those ancient scrolls into some sort of modern mp3?

 

I just finished with the led interior and license plate upgrade. I did it because the dome light was burned out anyway.

And then I read about the problems caused by led "upgrades." We shall see. . .

 

It's been more than a year since I changed mine to LED.

I didn't disconnect the negative cable on the battery either. I used non-metal objects to disengage bulbs and tape to pull away bulbs that were tough to wedge out.

 

If you put an s ton of wax on them they turn out super cherry

 

On my 2019 sport double cab, do I have to mess with the headliner in anyway, or will I be able plug and play? Thanks

 

I didn't disconnect the negative cable either. All power was off when I removed and replaced the bulbs. I only had one vanity light led installed backwards, but I reversed it and everything works. License plate leds were kind of a pain to remove/replace, but those eventually went in. The only problem is that the dome light will not go off after the doors have been closed. But that was the problem even before I did the upgrade. I think it's been that way ever since I bought the car.