What Have You Done To Your 3rd Gen Today?

It’s gonna happen again so why bother haha

 

Applied the Screen ProTech. Now just have to wait a couple of days and see if I screwed it up. There are currently a couple of smaller bubbles in the instrument cluster that I couldn’t get out. Didn’t want to tear it by working it too hard. Fingers crossed!

 

link or Energy Suspension part number thank

 

OGE dual battery with a

$465 Redarc BCDC1225D REDARC 25A in-Vehicle DC to DC Charger with MPPT — Dual Input for Solar & Alternator Charging, Green Power Priority - 12 or 24V Battery Charger Suitable with AGM, Gel, Lithium LiFePO4 Batteries

Redarc BCDC1225D.

 

I installed the same on the dials and radio. had one teeny tiny bubble in the corner of the radio I didn't see.
Didn't come out. Still there. I should have used more solution on it and it would have come out correct.
I screwed up and didn't use enough.

*edit*
I suppose I could remove it by using a needle. Maybe one day if I'm bored.

 

Road trip! That's not a bad drive!

 

I have protection…new RCI skid installed…

 

That is very true! I just actuall came back from central Washington yesterday

 

Just picked up the truck from @HeftyFabworks !

Accutune Stage 3A kit with Fox Performance Elite Series shocks.

The guys at Hefty Fab are awesome!

 

Didn’t really do anything to it, but realized for the first time that she uses the cup holders as stirrups. Free mod!

 

It did the same for me, but I just started the truck back up. I also had a portable radio as well so I didn’t even notice initially that it shut off.

 

$28 Energy Suspension- 9.4101G UNIVERSAL MOUNT

https://www.amazon.com/dp/B000CN9BZ0?ref=ppx_yo2ov_dt_b_product_details

 

Backseat dog deck.

Just finished this up tonight as it’s getting dark. The Tacoma back seat was horrible for my bloodhounds due to the small size and their inability to think critically about why they keep falling on the floor between the front and back seats. So I’ve seen some similar simple solutions and thought I’d share my attempt.

The deck is 24” x 53” 1/2” OSB because I had a good scrap piece in the garage. I laid that in and penciled the clearance for the center console. I used indoor/outdoor carpet wrapped over it with 3M spray adhesive and staples holding the upholstery. Then a solid bottom sheet of the carpet to complete and finish the wrap. I opted for the brown because that’s what they had at Menards with a texture on it and hopefully it will hide the hair a little better. The black carpet was smooth and thinner so this will hopefully be more comfortable and offer more traction.

Legs are spare pieces of 2x4 cut to 13”, screwed together into L shaped and upholstered with the same carpet. Then I used deck screws through the top to mount them. It’s light and easy to install/remove.

I’m sure someone smarter could engineer a folding and easier to store option, but simplicity seemed like a better route.

This weekend I’ll see how it does with my two idiots.

 

Installed my ebay snorkel earlier today, did it in a little over 5 hours taking my time so I didn't mess any other parts up. I also changed front fenders since I found one really cheap on fb so i could keep my original because I was scared of messing up.

The snorkel DID plug n play with my S & B Cold air intake box so it was great being able to keep that thing after looking on tw and only finding a couple "it doesn't fit" threads

 

you wont notice inside the cab while driving

 

will the mods ever end !!!?

 

Only every time I pass a shiny building, a shiny car in front of me or anything close to the truck that casts reflections of the turn signals out of sync.

Happens nearly every day.......which is why I was asking.

 

sorry you are triggered, hope you figure it out

 

lol - gotta love TW