Behind Rear Seat MOLLE Panels

If you have the time, I bet you could learn to make your own custom pad from watching Youtube videos, etc. Might be worth a shot for less than a $100 in materials? If I didn't work for a living I would try to do all of it myself

 

My current platform is built from plywood with a layer of foam flooring from Home Depot glued down on top, then some car floor carpet upholstered over top. The foam adds a bit of softness for a decent price (especially combined with a blanket so she can fiddle with that for maximum comfort.)

https://www.homedepot.com/p/Traffic...les-6-Tiles-Pack-24-sq-ft-24228DPHD/312491726

 

My next project back there would be to add this heating pad to the cushion somehow (maybe just under it):

Roadpro BlackCanyon Outfitters RPHB-110DB 12-Volt Polar Fleece Heated Travel Blanket

https://www.amazon.com/gp/product/B0009Y2CFS

I redid my second battery setup last summer, so now I have a 100 amp hour lithium smart battery. I can run one of these blankets for 9 hours and only use about 30% of the battery. We tested this out cold camping last season and it worked great up in our RTT. Now we're thinking the dogs should get their own??

 

Clean install!!
Any links to materials used?

 

Any updated interest in 2nd Gen Double Cab 1/2 molle 1/2 blank?
Any order build up for 2nd Gen Double Cab full molle?

 

A little late to the show, are you still making these, have a 2016 DCLB sport, interested in getting one
thanks

 

www.underlandoffroad.com took over operations for the MOLLE panels

 

Where are you getting the molle pouches and bags from?

 

The nicer ones are from Blue Ridge Overland. The big and small rectangle ones are from Amazon:

$20 AMYIPO Tactical Pouch Molle Admin Utility Pouches Multi-Purpose Large Capacity Increment Pouch Attachment Military Pocket Tool Holder Short Trips Bag (Black (2pcs))

https://www.amazon.com/gp/product/B08GYTJVTG/

Savior Equipment Tactical MOLLE EDC Pouch Multi-Purpose Lightweight Ultra Compact Utility Waist Bag - Laser-Cut Style Design, 2-Pack

https://www.amazon.com/gp/product/B07TTVH6GV/

 

Realize it’s been about a year since anyone has posted in this but what does everyone think about mounting Milwaukee pack outs to these? I have 2 socket sets I wanna secure but thinking they might be a bit heavy. One weighs 22lbs and the other is 17lb.

 

It might not work simply because the metal edges of the panel openings could cut the mounting straps, even zip ties. The load will have constant vibration working against the straps and then there's the hard jolts from potholes, speed bumps, etc.. So, even if the panel never warps from the load, mounting techniques alone may prevent it.

 

The Grayman molle panels are glass injected nylon. They would hold the weight just fine and they have smooth edges so they wouldn't cut through beefy zip ties easily. You could always use nicer straps to secure them, too. That being said, its always wise to consider worst case scenario. You wouldn't want these boxes or their contents flying around in a roll over.

 

You might be able to just straight mount a milwaukee wall mount (if that exists) to the molle panel, then attach the packout to it.