What have you done to your Tacoma today? 1st Gen Edition

Which washer? Its been a minute since I was inside one of those and cannot remember a directional washer.

 

The one I front of the belt. It’s concave. If it’s in backwards it’ll dig into the belt

 

There is suppose to be a washer on that idler

 

On the crank, tensioner, idler? I just don't remember a washer and now I am curious if I did something similar

 

On the crank

 

Thanks. I guess I just don't remember that one haha

 

I think the bfg was there to demonstrate that YMMV depending on manufacturer. He says at the end of the video that the pizza cutter he was testing is a rare breed and that if more offroad enthusiasts chose to buy them, more manufacturers would offer them.

It was probably a bit of a hint towards bfg as well.

 

valve covers off, lower plenum off (pulling the supercharger pulled threads out of the plenum.. yay! luckily i keep spares around... but yea engines super clean for 94k miles.. usually these lower mileage engines are sludgy.. but she was taken care of

 

I have a DOHC car tore apart in the garage right now and I gotta say, it's pretty wild the difference between it and the 5vz. Never realized that the intake cam drives the exhaust cam, that is clever.

 

old school toyota.

far cry from the style valve train in the newer 3.5 like my mister 2 has.

 

i have the 3vz cams laying in the garage.. its very tempting to toss them in this engine and see how it responds.. but man... i dont want to do it just to have to pull it all apart again if they dont run right LOL

 

Wow, very different. I was surprised to see the 5vz rocking flat tappet lifters. Looks like they ditched it in the end.

 

do it

 

The 5th valve train is a workhorse. Can survive with stupid low oil pressure.
The roller rocker addition on the new motors was purely for VVTI actuation angles being increased from what I’m told

 

I have used Grey RTV a bunch in the past. Kind of a pain to scrap off if you are in there on the future but its always been a good seal for me on all my diffs.

 

Wheels just ordered. They’ll come in this week and everything will be installed this coming weekend. So excited haha I’ve been waiting so long

 

I swapped my rear diff today. No leaks yet lol. Jump to 5.29 from what it had feels great I can turn the 35s now. But… the diff does have a “howl” on coast/decel. Below 25-20mph not noticeable. Guess I’ll see how long this diff will last.

 

Got it towed. Spitting oil out of passenger side tube seal. One of the coil packs was loose and I pulled out a chunk of the rubber from that coil pack. Making some knocking sounds. Misfiring the past two days. Oh and of course I'm hundreds of miles from home. Pray for me

 

Does anyone make rock sliders without a kickout?

 

Trailgear
Demello might, or did, not sure they do 1st gen stuff anymore