1st Gen Lunchtable Thread - General Discussion

@Kwikvette

https://www.instagram.com/p/CvDF7qiP9lh/?igshid=MTc4MmM1YmI2Ng==

 

Fuck yeah it is

 

Yes but they don't breakdown what the charge for each service. The bigger panels we have bent usually always get waterjet work and no matter what, always gets powdercoated. So the invoice will show the total price for the completed panel

 

Ok wow, I'm digging these tips with only .8mm kerf width



Might not look like a big difference but it is in person compared to a 1.1mm kerf width

 

First time cutting with the .8mm outside of a test piece



Came out sick



It's on 16 gauge too

 

Does anyone make aftermarket shift knobs for the J-shift transfer case? I know I could measure the threads and get a universal one but I want one with the correct markings on it

 

@Abeyancer

For when you get your CNC table, I noticed that I cannot see the lead-in marks at all with the smaller tip; the 1.1mm puts out enough heat that I run a 0.6 second pierce delay to cut 16 gauge.

It took a 0.8 second pierce delay for that same 16 gauge using the 0.8mm tip (I used 0.9 second delay) and with the many cut outs, not a single indicator of where the lead-in was.

 

12x1.25mm IIRC

 

Sure, but any with indentations or markings that tell you which position is which?

 

Memory

 

My brain wrinkles are tapped out

 

I have seen that one but for some reason it isn't resonating with me.

5050 is great! Love that spot. My favorite in the area is The Good Wolf, though. Small spot and I don't think they even have food but it's definitely the best beer in Truckee. I actually don't live in Truckee anymore, unfortunately. Just recently moved back to San Francisco but I'm slow to admit it. Would love to move back but life...and things.

 

I googled "Toyota j shift knob" and came up with several options



.

 

DiD yOu UsE tHe SeArCh FuNcTiOn

 

Just gonna send him a letter with this printed out inside

 

Aight ya, I use DDG but Google had some options, thx

 

Looks like the FJ version would work too: 36303-35210-B0
Will probably go with that since new is $32 and it's technically OEM

 

Dickosaurus

 

Is that a dickosaurus? Gramma must have remembered it from her youth.