Work Wheels S1HC

Hello,

I have a set of these Work Wheels S1HC from ShowStoppers.

I was wondering if there was anyone else out is using the Center caps and hub centric rings with the wheels.

I bought a set of 110mm to 106.1mm hub centric rings but it wont work with the center cap in place.

Anyone run in to this issue? what did you do ? Run the wheels with just center cap? Run the wheels with just Hub Centric rings? Run the wheels with neither?




Edit:

I measured the hub of the wheels myself and No hub centric ring needed.

 

I am running a set of these in Gunmetal grey. No hub ring was needed for my set. And I am running the caps also. The cap fit in almost tight from the back side. Used a small PC of masking tape to hold them in place while I put them on or rotate them. No issues. Are you sure you need the hub ring?

 

My caps dont sit tight in the wheel's bore.

I like to run a hub ring on all my wheels to make sure they are hub centric. instead of lug nut centric.

 

I don't like the look of big shiny silver so I just run it without it.

 

They must have changed them then. I have no space for hub rings at all. Like I said before. The caps are not tight, and will fall out if I take off the wheel. They get tight against the hub itself, and the wheel, when I tighten the wheels up. Do the hub rings fit tight? I have had rings on other aftermarket wheels that have caused issues, on other cars.

 

I like that look, but did not want to have to paint the hubs and drums.

 

@jhmw815 are you running hub spacers?

 

I may not run them. Will have to see how they look on the truck. I have Bronze color wheels.

The set of wheels have a 110mm center bore. So i ordered some aluminum 110mm to 106.1mm hub centric rings.

Edit:

I Measured the center hub myself and it looks like I won't be needed the Hub Centric rings at all.

Thank you For your help!

 

You may have to either enlarge the ring, or by a new set that is 107mm bore. That is if you really want to run the caps that bad. If I remember, my caps fit the hub ring on the truck right before I put the wheel on. But not the wheel. That is why I taped them in before installing the wheel. I know we spent enough on these wheels, I felt that the caps finished the look.


Pics when your done though either way!

 

I will definitely post some pics up when I get the tires mounted on them this weekend.