Please help: Connector Housing for Wiper Switch

Greetings,

I attempted to install a new wiper switch I bought from RockAuto and I ran into "a little problem" after trying to remove the pins from the pin housing. I read there is a small tool to de-pin the pins to avoid breaking them, but I messed up the housing in the process of trying to remove the pins with a small watch screwdriver. I'm posting this in an attempt to see where I could buy the connector housing since I already have the switch, which at this point I cannot install.

I have attached a picture of the actual switch housing to help identify the item.

Thank you.

 

What does that plug into?
Can you get us a picture of the front of the plug?

 

That is the main connection from the combination switch.

This just got very interesting.

There should be a part number on the connector.

 

That 431-04060 looks like a Toyota number
But I think there is more number. The sticker is messed up so I can’t see the first part of the number.

 

Looks like 84310-04060 is the correct part #

Turn Signal Switch Assembly !! List of $414.65

 

Man I tell you these guys are the best....they could find water in a rock.....

just has to be a toyota rock......

That connector seems only available in that whole harness....THE CLOCK....







1995-1998 Toyota Tacoma Multi Switch OEM 84310-04060 | eBay

 

Aint that a bitch.....

 

Good work on figuring it out.
You can usually buy just the connector from Toyota. No wire or pins. I’d have to see in the Toyota connector manual when I get home.

It would be nice if I could get a good look at the connector from the front.

 

Is this your connector or a internet picture?

We really need to see the front of the connector!!!

 

Not knowing what year not much more we can do.

I think there might be a few different plugs that plug into this connector!

 

That pic is off a current ebay listing..

A lot of these parts, that's the only place left to get em.


Somebody here on classifieds.......might have that in donor truck as we speak......
there's no shortage of donors here......

 

All this help the OP never returns !!

Did they not like the answer?

 

Yeah the different torture pics are always interesting.....

we've visited some dark places...

 

The pins look messed up after I tried to pull them without the proper tool.

 

The part number on the connector (female portion) reads 172457.

 

The whole part number is 84310-04060, as stated before. I'm trying to see if the housing comes separately without the switches.

 

That's correct. Very expensive. I already bought the wiper switch portion without the connector housing, it has the pins exposed. I thought it was only plug and play but the pins need an special tool to get them out.

 

So far that seems to be the case. Just the whole harness.

 

I'm attaching the front shots of the connectors. Thanks everyone for your help.

 

This is my connector, real pics. Please refer to previous answer for front shots. Thank you very much for your help.