North East CraigsList finds

Blue means kings right?!

 

MY EYES!! I cant unsee that shit

 

Has anyone laid eyes on a set of OEM LCAs that aren't beat to hell? I need them so I can replace the bushings and ultimately replace my own OEM ones.

 

I thought you can get oems from one of the Toyota parts site for ~$300 each. Better than a dealer for $600 each

 

I do. Just replaced mine, didn’t throw out the old ones yet.

And Dave is right, McGeorge sells new ones for like $260 or so +shipping

 

Didn’t know that. I was looking to replace the bushings as I already have em.

Main reason is most of us up here gotta cut em out, lol, so I’d rather just get old stuff and slap in the new bushings.

 

Swap in the whiteline bushings and a moog ball joint. Keep the grease fitting topped off and neverseize the bushing sleeves and you'll be golden for many years to come.

 

That is exactly the plan. Just need those LCAs, lol.

 

If you want, you can have these

if you can arrange TW Express (I’m in Staten Island, NY)
Unless they seem too beat up for you



BTW, just to clarify, those are turd gen LCAs

 

If you're going to aoaa that could be a possibility

 

Yes, that's the plan Got the site booked already and all!! But that's almost 2 months away, not sure how soon he'd want them.

 

I'm personally not going to AOAA, but that would work for a TW express. Not in a rush for them, so whenever is good.

 

I do have a set of 4 wheel spacers, 1.25” if you still need. Amazon special, forged hub centric. $40

 

Not sure what width I would need to go with honestly. Would a 1.25" be aggressive?

 

Happy to let you try them but it’s the most common size people get.

That said I run 1/4” in the front ( moving to 1/2” soon)rub the frame a touch. And running 1” in back.

I believe anything smaller than 1” and you’ll need longer wheel studs

 

also so is @Brownmatthall who is much closer.

 

Bora 3/4" spacers have studs built in.

I have some Bora 1/2" spacers, and I needed longer studs. Got my studs from here:
https://www.wheeladapter.com/

 

Might have to switch your tires if you decide to go

 

I'll give your's a shot, it should be good. Worst case, I guess more mods and more parts.

If John's are too much, I'll probably do the Bora 3/4" ones.

Lol my current ones are shot, no way they will last. I probably need new tires before inspection time.