Grey 1st Gen Supercharger and Black 2nd Gen Superchargers Instructions for installation

I continue to get lots of PM messages on how to install the supercharger.

So I’m posting this link from yotateck below for installation help and snout info to.



So here is a PDF version of the 1st gen supercharger install manual with part numbers list and other notes.

1st_Gen_TRD_Supercharger_Install_Guide.pdf

Nose supercharger drive replacement for the 1st gen with torque numbers:
3.4_Gen_I_Nose_Drive_Replacement.pdf

And the 2nd gen Supercharger manual as well for the heck of it.
TRD_Gen_2_Supercharger_Install_Guide.pdf

 

Thanks for posting. Should be added to a FAQ thats stickied....

 

I’m really stumped on supercharger install. What do I do with the vacuum line coming off the front of my intake and runs to the power steering pump? I can’t find any place to connect it to the supercharger. Thanks’

 

@1997tacomav6 do you know?

 

This one

 

What year truck?
1st gen supercharger?

 

1997 t100 new black kit

 

Ones goes to the intake,
One ties into to pcv valve hose by adding a T fitting

 

I’m still not quite understanding. The two vacuum lines I marked are 1/4” inside diameter. My pcv line is 3/8”. I guess I would have to get a 3/8”x3/8”x1/4” tee? Which line ties into the pcv?

 

Better picture

 

The smaller lines are actually 3/16”. The pcv line is 3/8”. I’m still not sure where either one is going to connect after I install the supercharger.

 

I think I figured out where the small line coming off the cold air intake box goes. It runs to behind the plunem. Looks like I will have to have a longer piece of line for that. Nothing like that in the kit It does have the right tee to cut into the pcv line and connect one of the smaller lines.

 

Does the line coming from my power steering pump tee into the pcv?

 

Yes,
One line goes from power steering and T off to the PCV tube, yes it’s a different size, get a T that has a small size for the power steering line and larger for the PCV line
One goes from the power steering to the intake manifold,

 

You bet a T with the correct sizes for the power steering line and the pcv line.
So the T will have different sizes depending what you need

 

Ok I think I got it now! Thanks so much for all your help. I really appreciate it!