fender well trimming

could anybody tell me or lead me to a thread that will show me the right way to do this with no metal cutting

 

Got any pics ?? With a 3" lift why do you need to trim fenders if I may ask ??

 

what size tires are you making room for? do you just need to do the pinchweld mod?all ya need there is a BFH, no metal cutting.

 

tryen to fit 33-12.50-15

 

Here's what I did for my 33's

 

^^^^^^^^^^^ How does this help the OP?

 

What wheel you got those big meats mounted on? Stock rim? 15x8? 15x10?

 

OP some pictures of your truck and sizes of wheels would help us out a little more... i didnt lift my truck but did need some trimming done, I used a cutting wheel on a grinder to cut them back a little bit

 

X2 thats exactly what i did to fit 33's..

 

I was just showing him what I did, just trimmed some plastic no metal cutting.

 

OP has a 2000, completely different.

OP, here is a good article on the "pinch weld mod".
http://www.expeditionswest.com/equipment/tacoma/bfg_mt_km.html

 

Yeah i have 33x12.5's on my truck we need to know the wheel you plan to use to determine what you have to cut. Also what size lift you have

 

my wheel is a 15-8 or 15-7 and i have a 3 inch lift with a 2 inch leveling kit (just because the ARB bumper and wench) im looking to get wrangler duratracks if that helps

 

Is that a 2" spacer on top of an OME coil spring with a OME nitrocharger strut? Whats in back? Blocks? Are you a 4x4?

Wow man, you go some pics of that setup?

 

ya i basically have 2 inch blocks on the front not enuf to tell i have blocks tho

 

My B

 

that's what i need thanks man that tells me why i could never find any plastic to trim

 

I always find it funny when 2nd gen people post in the 1st gen section thinking they can help

 

x10000000

 

has any body on here done that to there truck