What Have You Done To Your 3rd Gen Today?

It's making more sense now.

We shall see if the scratches accumulate....good point.

 

Beautiful truck. What suspension mods have you done? What lift? Best looking stance I’ve seen by far.

 

I used a piece of PVC pipe to make a guide to engage the spare elevator. It is held in place with a couple zip ties through drilled holes in the pipe. It is very easy to use now, even in the dark. I also installed a led light as an additional back-up light. I used a “T” plug and installed it in line with the factory trailer light harness, so it comes on with the original back-up lights - it easily makes twice the light the taillight led’s make.

 

Also just got some old 4R center caps that fit.

 

Those are so sweet!

 

Bought my 2017 TRD OR Access Cab Halloween 2016. Never did anything to it but the TRD pro grill and raptor lights.

Today did the Pop & Lock, DS18 tweeters, and the FX3 Gator tonneau cover. Pretty happy with it so far. Have the VLED footwell light kit coming next week with new vanity, dome, and map lights.

 

Installed my RCI bed rack and Maxtrax mount. Rooftop tent, wheels and tires are getting out on on Wednesday!

 

Good idea on the spare tire....

You should look at this thread for reverse light output. It made a big difference for cheap.

https://www.tacomaworld.com/threads/gy6-35-hir-921-reverse-light-upgrade-vs-high-power-leds.474996/

 

Nice!

 

40k mile front differential fluid in case you were wondering, "Should I check mine?"
Drain magnet had about 1/8 of crud on it.

 

Nice!

 

Got wheels painted white

 

You sure about that!?

 

​

 

Those sure do look better than my dust caps and painted hubs. Any chance you have a PN? Thx

 

It is not hard. Which version are you thinking about doing?

 

If you saw a Gen 3 with a mirror like finish it most likely would have been ceramic coated to achieve those results.

 

Probably the kit. With the 10 drops on the cloth, panel by panel

 

It is not hard to apply if you do it out of direct sunlight and take your time prepping the truck. The results will be great and you will save yourself lots of money and make it easier to keep your truck looking like new.

 

Thank you @Dpilotpaul for purchasing one of my, most likely final, license plate brackets. Glad I am not the only one that hates the big fugly plastic stock bracket. Much cleaner appearance.