Help w/ Yotaverse V2 pro grille on stock 18 Taco OR

Installing Yotaverse trd pro v2 grille on a 2018 TRD OR originally had stock. I got the Raptor lights to work. But the turn signals aren't and I've tapped into the turn signals right behind the bulb and my trucks battery dies immediately. I can jump it and it'll work again but have to disconnect the taps from the wires behind the bulbs. Ive read somewhere that stocks have a 4 wire connector towards the bottom but my trucks stock headlights only have 2 sets of 3 wires.

Driver side has 2 sets of 3 wire plugs that has the colors red light orange and black the other set of 3 wires next to it has green white and red/pink

and just for more info the turn signal light bulb wires has two wires light yellow-ish and white and the passenger has light blue and white (This is where I tapped my turn signal lights from the yotaverse grill and when I start up my truck it just clicks and the battery is dead)

Any ideas or anyone knows of where the turn signal lights from the V2 grill should go. The two videos that show where it should go says there's 4 wires but idk why my stock truck only has 2 sets of 3 wires and idk which one it is.

Idk if its also my battery either because I haven't changed the bad larry in 6 years.

Thanks!

 

Oh- A post title of “Need Help!” usually means you need help and are stuck somewhere and really need help.

 

Was I not supposed to title it that way sorry don’t know the rules new to the forum…

 

It’s general etiquette. Posting on the open internet “need help!” had to sound off in your head for such a question.

But not a huge deal. Edit the title to something more relevant, you’ll get some help for your needs.

Welcome aboard

 

Thanks. Yeah just edited it. Hopefully I can figure out what’s going on with these wires or if my battery was on its edge and I just pushed it off the edge.

 

If you don’t have any luck in this section, might try crossposting here: https://www.tacomaworld.com/forums/lighting.60/

Could also PM the staff and request they move this thread

 

Yeah just did. Thank you!

 

Welcome! There are some great auto electronics experts on here so you definitely came to the right place. Sorry I didn’t say hello at first- was kinda short and I apologize. Good luck with the lights, I am sure you’ll get it straightened out here.

 

Appreciate it and thank you! Definitely an awesome site didn't realize there was a huge community for taco's until I upgraded my wheels and tires.