1/2 inch rear axle shim

Anyone running toytec 1/2 inch rear axle shims? I have 5100’s and installed OME 884 coils hoping to get leveled out, got more lift than expected and now I have around 1/2 inch rear sag. If anyone is running the 1/2 inch shims any problems or complaints?

 

my 23 trail has half inch rear lift blocks from the factory. No issues at all

 

How long ago was the lift installed? The front may sag overtime making you level or close to it.

 

Like 2weeks.

 

Is it a normal block between the axle and leafs or a shim added to the leaf pack like the one in the picture?

 

is it a toytec block?

 

The trail edition and pro comes with a 1/2 inch lift block from factory for 2023. Part number should be (PT82A-35220-SS)

 

Thanks! Does it just slip under the whole leaf pack like the 1 inch blocks or do you have to take the leaf pack apart and insert it in the leaf pack? And also right now I have 5100’s but I’m thinking about switching to the 4600’s in the rear hoping for a softer ride. Ik the 4600’s are Mede for stock ride height, do you know if they would work with the 1/2 inch block?

 

They’ll install the same as the 1 inch block. I think you’ll be fine with the 4600’s but not sure it’ll help the ride. If you’re trying to get a smoother ride out back I’d recommend looking into hammer hangers from archive garage. It’s a night and day difference.