Dealer giving me 20% off all OEM parts for 60 days

What about a Cat Shield? Toyota sources them from MillerCat.

https://www.thedrive.com/news/buyin...er-shield-for-your-toyota-is-a-no-brainer-now

 

Ooooh I'll ask, we've had a few cars hit in my work parking lot.

 

You could do worse than OEM bed lights if you think you will be loading/unloading after dark.

 

TRD Pro Tails look killer with the black fender flares…

 

Trd pro exhaust, trd pro wheels, etc!

 

Buy another Tacoma at 20% off

 

Here is the MillerCat website prices, so you know if your dealer’s 20% off quote is a good deal or not.

https://catshield.com/products/millercat-toyota-tacoma-gen3-35l-cat-shield?variant=43456514457849

 

Lucky you

 

And store it for 40 years and hope it becomes a collector item??

 

Hey that’s a great idea!!

 

Enter yet 2 bed mats and I’ll take one off your hands.

 

Get your post count up and then you can enter the buy,sell trade threads. People are selling stuff cheaper than the dealer. Depending on your location, it could be less than a 20 minute drive.
Spend your money wisely

 

Second vote for remote tailgate lock. Easy mod, should have been stock on these trucks, especially the higher trims. Great, cheap addition and peace of mind.

 

Is the TRD Skid gonna interfere or need any modifications for the fit?

 

It shouldn't need any further modifications for both to fit.

 

No mods needed!

 

If you are installing the TRD skid ... get hard knee pads (like used for carpeting install). Balance the back part of the plate on your knees and skimper your butt under then install the bolts.

 

Why not balance it on a floor jack? Hand start the threads and then lock it down.
Doing your way is for young men. Btw that's how more than half the dealerships mess up and cross thread at least 2 of the bolts. Trying to put back on while the truck is on the lift or trying to lift 60 lbs off your chest and knees to get that bastard in place.been there done that and got the tshirt

 

Haha that’s how I did mine! And installed my Trd exhaust basically sandwiched between the exhaust and the ground lol

 

Not sure. Knee pads worked for me and act as two contact points. And I have also balanced RCI engine skid on a circular-saw-case-with-2x4s and use screwed-together-stack-of-wood to support the RCI transmission skid plate when I install/remove the engine skid ... the rear bolts for engine skid are front bolts for transmission plate. But knee pads allow adjusting the plate on 2 points of contact I guess is my best argument.